Time Slips and Dyno Section is for posting 1/4 mile time slips and dyno graphs

512 rwhp on 93 pump gas and meth injection *dyno graphs*

Thread Tools
 
Search this Thread
 
Old 02-28-07, 08:59 AM
  #1  
_________________________

Thread Starter
iTrader: (3)
 
zinx's Avatar
 
Join Date: Jul 2002
Location: Indianapolis
Posts: 1,723
Likes: 0
Received 1 Like on 1 Post
512 rwhp on 93 pump gas and meth injection *dyno graphs*

Here are my two dyno graphs at around 21 psi of boost on 93 pump gas and 100% methanol injection using coolingmist's progressive controller. I used two nozzles which i think are a M8 and M12. All my other mods are in my garage. It was tuned by Steve Kan.

This is Horsepower and torque, don't mind the lines that shoot back down, i guess the dyno didn't catch the end of the run soon enough
http://www.indyhp.com/pics/512dyno-hpvstq.jpg

this is horsepower and air fuels, i cut off the scale for the a/fs but its 8-18, they are mostly in the low 11s
http://www.indyhp.com/pics/512dyno-hpvsaf.jpg
Old 02-28-07, 09:07 AM
  #2  
Rotary Enthusiast

 
DrunkenBowler's Avatar
 
Join Date: Mar 2003
Location: STL Area
Posts: 931
Likes: 0
Received 0 Likes on 0 Posts
Nice!
Old 02-28-07, 09:19 AM
  #3  
Senior Member

iTrader: (5)
 
streetRx7's Avatar
 
Join Date: Feb 2004
Location: nj & st.croix
Posts: 495
Likes: 0
Received 0 Likes on 0 Posts
very good...
Old 02-28-07, 09:20 AM
  #4  
Full Member

 
KBSRX7's Avatar
 
Join Date: Jan 2006
Location: Blackwood,NJ
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
Ahhh

I've been wanting this system for awhile but money is too tight. I think it beats paying $10 a gallon for race gas.
Old 02-28-07, 09:26 AM
  #5  
Lives on the Forum

iTrader: (9)
 
ptrhahn's Avatar
 
Join Date: Feb 2002
Location: Arlington, VA
Posts: 9,027
Received 500 Likes on 274 Posts
Hope you're pointed straight between 4800 and 5300 rpm.... you jump about 125 hp and Tq in 500 rpm!!
Old 02-28-07, 10:46 AM
  #6  
Rotary Freak

iTrader: (8)
 
books's Avatar
 
Join Date: Mar 2002
Location: St. Louis
Posts: 1,731
Received 37 Likes on 30 Posts
congrats

nice talking to you and I'm glad to see you hit your goal
Old 02-28-07, 01:20 PM
  #7  
Racing Rotary Since 1983

iTrader: (6)
 
Howard Coleman's Avatar
 
Join Date: Oct 2001
Location: Hiawassee, Georgia
Posts: 6,097
Received 522 Likes on 290 Posts
congratulations. that may be a record hp number on pump! (and of course AI)

howard coleman
Old 02-28-07, 09:52 PM
  #8  
needs more track time

iTrader: (16)
 
gracer7-rx7's Avatar
 
Join Date: Mar 2006
Location: Bay Area CA
Posts: 9,197
Received 511 Likes on 351 Posts
daym. big fricking number there.

bridge ported motor
T88
etc...
Old 02-28-07, 09:58 PM
  #9  
_________________________

Thread Starter
iTrader: (3)
 
zinx's Avatar
 
Join Date: Jul 2002
Location: Indianapolis
Posts: 1,723
Likes: 0
Received 1 Like on 1 Post
Thanks guys! I drove it tonight and granted the roads are cold here in indy, but i can already tell traction is going to be a issue this season.
Old 03-01-07, 12:20 AM
  #10  
Rotary Enthusiast

 
mirabile's Avatar
 
Join Date: May 2006
Location: Ambler,PA
Posts: 1,406
Likes: 0
Received 1 Like on 1 Post
Really nice man.
Old 03-01-07, 12:39 AM
  #11  
Banned. I got OWNED!!!
 
KX500FD's Avatar
 
Join Date: Dec 2006
Location: NC
Posts: 111
Likes: 0
Received 0 Likes on 0 Posts
sweet...
Old 03-01-07, 10:02 AM
  #12  
Rotary Freak

iTrader: (8)
 
Cgotto6's Avatar
 
Join Date: Nov 2003
Location: Bothell, Washington
Posts: 1,893
Received 2 Likes on 2 Posts
Originally Posted by zinx
Thanks guys! I drove it tonight and granted the roads are cold here in indy, but i can already tell traction is going to be a issue this season.
Haha, you think? ****, its an issue for me and I only have 360 at the wheels. Your gonna get all kinds of wheel spin, in almost every gear i bet too.
Old 03-01-07, 10:08 AM
  #13  
_________________________

Thread Starter
iTrader: (3)
 
zinx's Avatar
 
Join Date: Jul 2002
Location: Indianapolis
Posts: 1,723
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Cgotto6
Haha, you think? ****, its an issue for me and I only have 360 at the wheels. Your gonna get all kinds of wheel spin, in almost every gear i bet too.
I had no traction problems when i was in he low 400s with my previous street ported motor, even in 1st and 2nd.
Old 03-01-07, 10:16 AM
  #14  
thats not paint....

 
7-sins's Avatar
 
Join Date: May 2001
Location: Manassas, VA
Posts: 2,231
Likes: 0
Received 2 Likes on 1 Post
wow, nice numbers. How much is Methanol a gallon. Like $1.50? and how often do you fill up the reservoir?
Old 03-01-07, 11:23 AM
  #15  
_________________________

Thread Starter
iTrader: (3)
 
zinx's Avatar
 
Join Date: Jul 2002
Location: Indianapolis
Posts: 1,723
Likes: 0
Received 1 Like on 1 Post
Originally Posted by 7-sins
wow, nice numbers. How much is Methanol a gallon. Like $1.50? and how often do you fill up the reservoir?
The VP Racing M1 Methanol was about $6 a gallon but it was in a 5 gallon pail. I think if you buy a huge drum of it, its pretty cheap or if you don't buy VP Racings stuff, which i guess is considered some of the best.

How often you fill up the reservoir just depends on how often you get into boost, and how long you are in it. I really have had enough seat time to tell at this point how often i will be refilling it.
Old 03-01-07, 11:55 AM
  #16  
thats not paint....

 
7-sins's Avatar
 
Join Date: May 2001
Location: Manassas, VA
Posts: 2,231
Likes: 0
Received 2 Likes on 1 Post
A little more $$ then I thought, but still beats the pants off paying $13 to go 15 miles or so on C16. I just searched for general Methanol, I didn't know VP made it.

Those reserviors are what.. 1.5 gallons. I am guessing maybe 500 miles or so. City & spirited driving? I would be interested to see what your results are.

Originally Posted by zinx
The VP Racing M1 Methanol was about $6 a gallon but it was in a 5 gallon pail. I think if you buy a huge drum of it, its pretty cheap or if you don't buy VP Racings stuff, which i guess is considered some of the best.

How often you fill up the reservoir just depends on how often you get into boost, and how long you are in it. I really have had enough seat time to tell at this point how often i will be refilling it.
Old 03-01-07, 12:07 PM
  #17  
NYC's Loudest FD

 
RX794's Avatar
 
Join Date: Mar 2001
Location: Long Island, NY
Posts: 1,539
Likes: 0
Received 1 Like on 1 Post
Nice numbers, are these HP ratings SAE corrected?, cause I don't see that in the graph.
Old 03-01-07, 12:08 PM
  #18  
_________________________

Thread Starter
iTrader: (3)
 
zinx's Avatar
 
Join Date: Jul 2002
Location: Indianapolis
Posts: 1,723
Likes: 0
Received 1 Like on 1 Post
Originally Posted by RX794
Nice numbers, are these HP ratings SAE corrected?, cause I don't see that in the graph.
Yes, i believe so.
Old 03-01-07, 02:23 PM
  #19  
v8 destroyer

iTrader: (3)
 
DrewS2k's Avatar
 
Join Date: Mar 2003
Location: Grand Prairie,TX
Posts: 1,023
Likes: 0
Received 0 Likes on 0 Posts
Where did you get your methonal set up??
Old 03-01-07, 02:32 PM
  #20  
_________________________

Thread Starter
iTrader: (3)
 
zinx's Avatar
 
Join Date: Jul 2002
Location: Indianapolis
Posts: 1,723
Likes: 0
Received 1 Like on 1 Post
Originally Posted by DrewS2k
Where did you get your methonal set up??
www.coolingmist.com

It is their progressive vari-cool setup. Its wild to go up and put your hand on an intercooler pipe right after a dyno run and it feels ice cold to the touch.
Old 03-01-07, 03:33 PM
  #21  
Original Gangster/Rotary!


iTrader: (213)
 
GoodfellaFD3S's Avatar
 
Join Date: Mar 2001
Location: FL-->NJ/NYC again!
Posts: 30,529
Received 539 Likes on 326 Posts
Originally Posted by zinx
I had no traction problems when i was in he low 400s with my previous street ported motor, even in 1st and 2nd.
Hm, at 15 psi with my new 500R setup, I'm not getting solid traction on WOT runs until I shift into 3rd at about 70 mph. This is with good condition 275mm width BFG G Force KDs in the back.....
Old 03-01-07, 03:41 PM
  #22  
_________________________

Thread Starter
iTrader: (3)
 
zinx's Avatar
 
Join Date: Jul 2002
Location: Indianapolis
Posts: 1,723
Likes: 0
Received 1 Like on 1 Post
Originally Posted by GoodfellaFD3S
Hm, at 15 psi with my new 500R setup, I'm not getting solid traction on WOT runs until I shift into 3rd at about 70 mph. This is with good condition 275mm width BFG G Force KDs in the back.....

Its strange, i know. Maybe it was that the turbo spooled so late (especially on the streetport) or that i'm still on stock suspension and it shifts the weight on the back tires, but i definitely hooked up and it was making power.
Old 03-01-07, 08:50 PM
  #23  
Racing Rotary Since 1983

iTrader: (6)
 
Howard Coleman's Avatar
 
Join Date: Oct 2001
Location: Hiawassee, Georgia
Posts: 6,097
Received 522 Likes on 290 Posts
i pay $1.99 per gallon for methanol in milwaukee. find a circle track and you will find cheap methanol. BTW, i run a 4 gallon fuel cell in my spare tire well.

any questions on the subject go to the Auxiliary Injection section of this board.

zinx, do you have any knock readings?

howard coleman
Old 03-01-07, 11:29 PM
  #24  
Rotary Freak

iTrader: (3)
 
Jay7 Nyc's Avatar
 
Join Date: Feb 2004
Location: NYC - SFL
Posts: 1,696
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by KBSRX7
I've been wanting this system for awhile but money is too tight. I think it beats paying $10 a gallon for race gas.
AI is great, and I would to use AI for safetly measures but not to replace c16. In my opinion AI should be used as a safety blanket more then a replacement for higher octance fuel. If you try running 25psi and god forbid you have a bad tank of gas or something malfunctions with the AI kit you will have no more motor. As with c16 you're safe regardless if your tune is onpoint. Just my $0.02 i'm no professional.

Nice #s Zinx, looks like dynapack software. Glad you got your AI system working effectively. Steve Kan is a good tuner, not doubting Kans' skills at all but I think the #s are off since HP/TQ don't cross at the certain RPM...

Jay7...

Last edited by Jay7 Nyc; 03-01-07 at 11:35 PM.
Old 03-02-07, 07:53 AM
  #25  
Original Gangster/Rotary!


iTrader: (213)
 
GoodfellaFD3S's Avatar
 
Join Date: Mar 2001
Location: FL-->NJ/NYC again!
Posts: 30,529
Received 539 Likes on 326 Posts
Originally Posted by Jay7 Nyc
Nice #s Zinx, looks like dynapack software. Glad you got your AI system working effectively. Steve Kan is a good tuner, not doubting Kans' skills at all but I think the #s are off since HP/TQ don't cross at the certain RPM...

Jay7...
Jay, the hp and torque curve cross at 5252 like they're supposed to.....


Quick Reply: 512 rwhp on 93 pump gas and meth injection *dyno graphs*



All times are GMT -5. The time now is 12:19 AM.