Post Pics of your FD Wheel Fitment!!
08-30-12, 10:10 AM
#1130
In the Air
iTrader: (1)
Join Date: Aug 2012
Location: Seattle WA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I've been looking everywhere for a set of side defusers, where did you get those? cost? I found some on rhd japan but they wanted over $300 for the shipping alone.
08-31-12, 03:55 PM
#1134
In the Air
iTrader: (1)
Join Date: Aug 2012
Location: Seattle WA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
i know this is post pics of wheel fitment, but i figured better here then the tech questions. If i wanted to run 18x10 all around, what fender would work? will the feed 20mm fenders work? can i achieve this with just a role or flare? grateful for any input thanks!
08-31-12, 04:22 PM
#1135
Yes, 18x10 will fit stock body.
Offset (and negative camber) will determine how wide of a tire you can run.
+45 offset would be the ideal set up and allow 18x10 +45 with 265/35-18 all around with no changes to alignment or body.
Well you *might* have to add some negative camber in front or roll the front fender lip under, but not both like a more aggressive fitment.
I run 18x10.5 +38 265/35-18 all around because I couldn't find a higher offset rim I liked/could afford.
I had to roll my front fender lip under and car already had max front camber from auto-x.
Offset (and negative camber) will determine how wide of a tire you can run.
+45 offset would be the ideal set up and allow 18x10 +45 with 265/35-18 all around with no changes to alignment or body.
Well you *might* have to add some negative camber in front or roll the front fender lip under, but not both like a more aggressive fitment.
I run 18x10.5 +38 265/35-18 all around because I couldn't find a higher offset rim I liked/could afford.
I had to roll my front fender lip under and car already had max front camber from auto-x.
09-03-12, 04:42 PM
#1137
Full Member
iTrader: (1)
Join Date: Jan 2010
Location: bangladesh/sydney
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
hi there guys this is an awesome thread, i was just wondering if anyone would know the meanest possible setup for a FD with work meister s1's..... guys i know its out there somewhere i looked for ages and still cant find it thus i ask u guys, let me know if anyone got a clue... i mean i dont mind rolling it a bit at the rear but has too be good setup... 18's is what i am looking at...
currently i have the mazdaspeed lm1 that came with the car from japan.. was originally gold with silver lip now totally black..
currently i have the mazdaspeed lm1 that came with the car from japan.. was originally gold with silver lip now totally black..
09-03-12, 04:46 PM
#1138
Full Member
iTrader: (1)
Join Date: Jan 2010
Location: bangladesh/sydney
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
mind u guys i dont want a overly done setup just something that is cool with the stock fenders, maybe a bit of rolling... as my project isnt going for looks at all
09-04-12, 11:52 PM
#1139
Make an assessment...
iTrader: (3)
Have you seen DCUPS old car? I think his rears might have been flared just a tad though, and I think he was stretching his tires quite a bit (not sure what you wanted with that). He had a pretty aggressive setup.
[/IMG]
09-06-12, 10:24 AM
#1145
Junior Member
iTrader: (2)
Join Date: Jan 2009
Location: Sacramento
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Not a fan of the color, haven't seen an RX7 pull off a light blue/tiff blue very well yet, I don't think those colors are flattering. Props for being different tho and doing your thing.
