^^^ mmmm new wallpaper

 

Thanks dude! Glad you like it.

 

lol wish i was collecting. traded the rotiforms for these...never shall i purchase rotiforms again.

 

I'm just wondering if anyone has pics of 18x11 +39 offset in the rear? I'm considering a set and wondering how it will fit with 315/30ZR18 on the rear, my fenders are already rolled but will they need to be pulled? Right now I'm on Tokico 5 ways and Tein SS springs, I plan on upgrading to coilovers soon

 

I've searched with not much success, but I'm looking to see what 17x9.5 +22 looks like on all 4 corners. I'm sure I can make it fit, but I'm concerned with what tire size to go with. Between 245-265/40, just don't know if 265 will be too wide and if I go with 245, should I have gone with 255's. I'll go with wide front fenders if I need to.

 

A pull is a must dude. Look at my car ^^^ im running 11-8 on the rear. Maybe that would give you a better idea how much youll need to pull

 

I figured, but yours is 47mm difference from the specs I wanted to go (I'm assuming that's -8mm and not +8mm) The closest person to the specs I want to get looks like Willtet but his setup was 18x12+32 with 315/30/18 that's an inch wider and 7mm further out...its hard to judge how things would look, plus it doesn't look like his fender was pulled too much at those specs

 

I think you might be alright. 47mm is quite a difference, especially since Jose's pull isn't THAT crazy. Although he's stretching his tires and still poking a bit.

But looking at Willtet's setup, I think you'd still be alright. Although part of that inch wider wheel is taken in account for the 7mm too, know what I mean? It's not an inch PLUS 7mm difference, those two combine at least a little bit. 7mm=.275", and considering half of the inch extra he has is on the back side of the face anyway, you're only talking about a difference of almost a quarter of an inch. Or maybe I'm thinking crazy lol. You might be alright, but you'll at least need a roll.

 

True&true

 

Anybody?

 

re amemiya am7 18x9 f 18x10 r

 

dyno, specs on the wheels and if you had to roll the fenders? I want to go 18x9.5 +30 all around and dont know if it will fit.

 

^ i run 18x9.5 +22 all around with 235/40

rears tuck nicely, fronts poke a bit with -1* camber. a little more and they would also tuck really well. though I wish I could drop it more. Suspension is maxed on tokico's and Eibachs.

 

Kiku, so a roll isnt needed for 18x9.5 +30 on front?

 

nice

 

You will need a roll if your car is anywhere but stock height.

You can tell by the front fenders. They are chewed up. Im assuming they didnt roll them lol

 

austin roads sucked. i was fine for 6months without a roll in DFW. then austin murdered them haha. I would recommend a slight roll, but dont plan on going over any bumpy roads

 

CCW Classics 18x10.5 7.75 back spacing. 1/4 spacer in the rear. 285/30/18's all around. Center color is "titanium gold"

 

Those CCWs look gooooood. I love that titanium gold.

 

Clean and simple!! CCW looking good with that nice black paint

 

"Wooooahhh that looks good...."

The exact words out of my mouth.

 

Looks awesome, I love the look of CCW classics.

 

Those wheels are 18x9+15 with 245/40.

my fenders were rolled and the fronts were slightly flared using the book method. i still rubbed..

 

so i got a new setup after i sold my varrstoens.

heres a little teaser.

 

^Looks good!