WOooooooooooooooooooooooooooooooo Thats phat.

What front bumper is that.

 

S4 + a GP Sports bottom it looks like.

 

+1 you should only have about 1 degree of camber in the rear, maybe a little more.

that looks worse than my car and I'm at like 3.5 degrees and it sucks, the rear end is all over the place on an auto-x course.

what are you offsets on those wheels? it looks like your rear is too low, you might not be able to fix your camber and have it still fit...

 

I saw some wheels that Sen2two is selling. He doesn't have the offset but they are 16x9.5 Enkie 92's.
Think I could fit them without going with wide fenders?
what tire would you recommend?
Thanks guys

 

read thru the thread and I see now that 9.5 will not fit up front without fenders....Guess I gotta look for another set-up

 

Anyone? Did a search on SR wheels but could not find anything.

 

Found a set of old school Volk Daytona's.. wondering if they'll fit my Fc, completely stock suspension setup and body. (well besides turboII hubs and brakes)
They're 17x8.5 with a +35 offset.

 

the white s4 looks like Hot Wheels Sixty Eights made by KMC

 

[QUOTE=ballinnmiami240sx;9685937]Thats my car....lol.... they will fit perfect with a front pull and a rear roll/small pull. You'll have to run a 215 40 up front and a 225 40 max tire for the rear. It would look amazing though. You'll have to play with camber settings.

This is razmus fc. he runs a 17x9 +0 all around. A 17x 10 +20 will be sunken in -7 degress.



what wheels are those?

 

On my 240:

mustang replicas

on razmus FC:

hotwheels by kmc

 

front -- 18x8 +32mm with 225/45R18

back -- 18x9 +35mm with 245/45R18

will these work with out any mods?

 

I want to get some wheels that are 17x8 ft and 17x10 rear. What offset would i need to keep them from sticking out too much. I dont plan to slam the car im just gonna lower it alittle. Ive seen alot of setups on here but i want to know if theres gonna be any problems if i go that wide in the rear. Any suggestions?

 

I'm looking at getting the same set up. After quit a bit of research I think it would be best if you tried something like a +10 offset on the rear with tire stretch and a rolled fender it should fit.

But the best thing to do would be to buy the rims how you want them and make them fit. The car is the canvas, not you. Don't submit to something that looks like it can't be done. MAKE THAT WHEEL FIT!!!! THAT'S WHY ITS CALLED FITMENT!!!!

 

so just using this as an example. if i had a 17x8 wheel and a 17x9 wheel with the same offset of +30 would the 17x9 wheel be half inch wider both sides or would the 1 inch be added to the inside or outside?

 

half inch wider on each side.
the offset is the distance from the hub to the center of the wheel.

 

Google search: Offset Calculator

 

Im goin to go look at some 17x7 +42 215/45/17 today, will they fit with out hitting anything inside?

 

they fit good but im goin to need some spacers, it barely rubs on the springs. where can I get the spacers?

 

ebay

 

17x9 +30 fit all the way around with stock struts? i plan on running coilovers but it will take sometime.

 

No, +24 is the minimum for 9" wheel up front. IDK about stock struts might need less.

 

I have 17x8 +30 now and i have about .7in gap between the strut and tire. 17x9 +30 should only take up .5in

 

Then why did you ask if you're so sure? I have Tein coilovers and run a 17x8 +35, and I'm pretty close to the suspension.

 

Sounds like you both are talking about the same thing. If you still have not ordered your rims I would select a wider offset, getting as far away from the strut as I can (without it looking funny)

Buy the rims how you want them and make it fit like I said earlier (thats why its called fitment) don't leave yourself with no room next to the strut when you know you could have just got a wider finder, then you get mad because the rims don't fit.

Get something outrageous and make it fit

 

ok well i didnt get any answer b4 so ill try again...
i have 16x8 -0 all around...... the backs have a 245 50 r16 tire and they fit fine... the fronts with same tire didnt quite fit... so i went and found 2 tires but they were 215 55 r16 and they fit worse... what tire can i run ? ..... i put on my stock tire and it is a 205 55 r16 but they said its too stretched? does it make a differece if its a 205 50 r16? or a 215 50/45 r 16?

i need help i want them on....
thanks
( 245 50 r16)