Josh18_2k

iTrader: (3)

its a good offset to clear the insides, and look nice. fitment with fenders totally depends on tire size and camber. you'll probably clear with like 215s and camber plates, but thats a bit of a stretch.
with any decent amount of rubber, you'll want wide front fenders, and possibly pull the rears a little. (decent meaning like 245's)

SINCITYFC

I'm sorry, I just realized I didn't specified. This is for the rear only, I have Tein coilovers and the rear camber bar so, can I run 255's on that and get away with minor fender rolling?

ilia

iTrader: (4)

17x9+11 should be fine on stock metal in the rear. I run a 17x10+20 and it's decently flush on stock metal... just rubs the letters off the tire sidewalls.


Now can anyone answer my question?

E_Dub

How about 18x9 0 offset in the front with a 215/40 and 35mm overfender. Anyone run that before. I'm trying to guess my fender clearance.

w00t

iTrader: (-1)

Think anyone can guess around what offset/wheel size and tire size this FC has?





And how many mm's you think those fenders are?

E_Dub

When that car was for sale the owner never listed the offsets but the wheel sizes were
17x8.5 Fronts
17x10 Rears

Those are Foresight Fenders 30mm fronts and 35mm rears.

Yobai Party

iTrader: (2)

Stock fenders with a roll/pull, Stance GR+ Pro coils.

Will these fit?

18X8.5 +23 225/40
18X9.5 +23 235/45

Thanks

ilia

iTrader: (4)

^Yes.

boostinfc3s

will http://cgi.ebay.com/ebaymotors/17-9-....c0.m245.l1318 fit?

CarbonFD3Assault

^^^ are you ******* serious?..

RUSTANG RIMS ON AN RX-7??????????

Josh18_2k

iTrader: (3)

^omg no!!!
yes they fit, but stick out a little. you'll want 20mm front fedners and roll/pull the rears. or just stretch tires, and/or run lots of camber.
here they are with 245F and 275R, 1 degree camber all around (i'm now at like 2.5 up front)

boostinfc3s

what size tires should i run if i don't want to roll my fenders?

Josh18_2k

iTrader: (3)

you'd have to run a decent stretch. i would guess 225/45/17 Front and 245/40/17 Rear is about the widest you could use on stock fenders (still gotta roll inner lip)

They are 17x9 +24 and 17x10.5 +27. you could prolly find other cars with similar sizes/offsets in this thread.

if you want a proper (yet agressive) alignment, you'd be better off with 17x9 all around, on like 235's. lots of camber in front, 1 degree in back.

raceneked

got a web addy for foresight? or if GReddy still makes their wide-body kits? Or where one can find them?

Risky Devil

iTrader: (1)

Contact Shineauto

pimpinthe7

ok im sorry to ask but i dont have any fenders or anything i just would like to know the widest rimm size you can but on a stock car how big and wide w/ what tire ...cuz i dont want to buy something and it not fit..but i want something wide..thank you all

MaczPayne

iTrader: (5)

Just double checking

Will this fit:

17x9 +25 all around
Panspeed overfenders + roll
255/40/17
Stance coilovers

i'd like to run without an overfender, but if that's required, then I'll get one.

-==L=a=N=c=E==-

looking to run 18x9.5 +15 with 265/35R18's

Will these fit all round with overfenders? 20mm front and 30mm rear?

90FC

Its going to be close to the coilover up front. I'm running 17x8.5 30mm offset up front and I clear by 1/8" of an inch, you will be about 1mm closer.

You might clear the fenders all around with 255s and no overfenders, I'd try it first and then buy them if you need them. Your definitely going to need a lot of camber up front.

whitelightnin

90 gtu with JIC magic FLT-Tar Coilovers.

FRont 17x7 +40
Rear 17x9 +40

Sooooo.

Im thinking:
225/45/17 on front
265/40/17 on rear

SOUND GOOD????

finally got the money to buy these suckas. lol

ARD T2

iTrader: (22)

I think you'll hit coilovers with the 7 +40 up front and that size tire.

265/40 is really hard to find

Have you done a test fitment?

whitelightnin

Thanks for the quick reply.
No I haventt done a fitment with rims yet? I really need to order tires soon.

I've found some great falkens at 265/40 (265 x .40 =106)for the rear.

For the front would it be better clearence with a 215?

If so, in the front should I go with:

215/45( 215 x .45 = 96.75)
*or*
215/50 (215 x 50 =107.7)

Im guessing 215/50 as the height is almost identical to the rear height.

Sorry if these are newb ?'s. Ive had 15x6 on the front and rear of my rx7 for the past year and I've never dealt with seperate tire sizing for fronts and rears. I want this to look sick when I lower my ride. I cant wait to get these rims/tires on!!!

Rob

E_Dub

Can I fit

18x10 +22 fronts and 18x11 -16 rears with a 30mm front fender and 35mm rear?

Here is a pic of the wheels

E_Dub

I think the fronts will either be 1mm into my coilovers or just clearing. I test fit a 17x9 +42 and with a 5mm spacer it still rubbed the threads on the coilover. With both my 5mm spacers it was fine. Technically I should have 7mm more clearance with the 10J +22. Also it is an 18 so it will be higher up the threads most likely giving it more clearance. The rears will stick out 5mm out of the fender. I think.

Anyone else running fitments like this?

drftwerks

iTrader: (1)

equips have really low disc, so you will prob need spacer for the calipers in front.

the rear i think you will need 50mm at least.

which i have and would consider selling or trading for 30mm

and i saw these today on yaj, ahhaha.