will a 20G intake compressor fit a Garret T3 exhaust housing?
Thread Starter
Full Member
Joined: Nov 2001
Posts: 103
Likes: 0
From: Leighton, PA
will a 20G intake compressor fit a Garret T3 exhaust housing?
1 of my friends had a Supra MKIII, and he had a 20G on it, well he crahsed it and wants to sell the 20G, he did'nt have time to unbolt the exhaust side of the turbo and everything, so he pulled the Intake compressor outta the housing, i wanna buy it but on the Z31T's 84-86 they came with a garret T3 87-89 came with a T25. But on mine si have a T3...and i need to know if a 20G intake compressior will bolt onto the T3 exhaust housing.
help me plz, cause i can get this turbo very cheap!!!!
thanx
ps: 20G=mitsu turbo
T3=Garrett turbo
help me plz, cause i can get this turbo very cheap!!!!
thanx
ps: 20G=mitsu turbo
T3=Garrett turbo
Thread Starter
Full Member
Joined: Nov 2001
Posts: 103
Likes: 0
From: Leighton, PA
Yes node they do have the T4/T3 hybrid. but i can get this 20G for ******* dirst cheap.. and i know its to small for a rotary but i dont have 1.. al i m asking is if it fits or not?
Lurking..................
Joined: Mar 2001
Posts: 2,220
Likes: 0
From: PA
They make t3/t4's but I don't think expecially for rotarys, I've seen them for eclipses and stuff though, even those I think would be a little small for a rotary. HE DOESN'T HAVE A ROTARY, HE HAS A OLDER 300Z, so basically his question is only to do with the turbo asking if the 20g intake housing will bolt onto a t3 exhaust housing..
P.S. Aren't 16g, 18g, 20g turbo's based on the stock 14b mitsubishi turbo found on eclipses?? Wonder if you could use a exhaust housing off of a 14b??
P.S. Aren't 16g, 18g, 20g turbo's based on the stock 14b mitsubishi turbo found on eclipses?? Wonder if you could use a exhaust housing off of a 14b??
Last edited by black99; Feb 26, 2002 at 11:37 PM.
Trending Topics
Thread Starter
Full Member
Joined: Nov 2001
Posts: 103
Likes: 0
From: Leighton, PA
Originally posted by black99
They make t3/t4's but I don't think expecially for rotarys, I've seen them for eclipses and stuff though, even those I think would be a little small for a rotary. HE DOESN'T HAVE A ROTARY, HE HAS A OLDER 300Z, so basically his question is only to do with the turbo asking if the 20g intake housing will bolt onto a t3 exhaust housing..
P.S. Aren't 16g, 18g, 20g turbo's based on the stock 14b mitsubishi turbo found on eclipses?? Wonder if you could use a exhaust housing off of a 14b??
They make t3/t4's but I don't think expecially for rotarys, I've seen them for eclipses and stuff though, even those I think would be a little small for a rotary. HE DOESN'T HAVE A ROTARY, HE HAS A OLDER 300Z, so basically his question is only to do with the turbo asking if the 20g intake housing will bolt onto a t3 exhaust housing..
P.S. Aren't 16g, 18g, 20g turbo's based on the stock 14b mitsubishi turbo found on eclipses?? Wonder if you could use a exhaust housing off of a 14b??
Reted: i wanna buy this turbo if it fits, cause im getting it for about $50.00 the guy dont know **** about his car, but the turbo was just rebuilt.. so when i say dirt cheap thats what im saying
CAN SOMONE ANSWER MY QUESTION PLZ?
i know this is'nt a rotary question.. but i need my question answered
thanx
root
Joined: Mar 2001
Posts: 1,200
Likes: 0
From: Phoenix, AZ
For $50 buy it.. You could always sell it on thepartstrader.com for more, couldn't you?
I really don't know how much these turbos go for.. I would check thepartstrader and see what the value is..
-Zach
I really don't know how much these turbos go for.. I would check thepartstrader and see what the value is..
-Zach
Lurking..................
Joined: Mar 2001
Posts: 2,220
Likes: 0
From: PA
I agree with zyounker, buy it and if you have to sell it on the partstrader/ebay if it doesn't fit then you should make enough off of selling this one to buy some kind of used turbo that will fit..
Thread
Thread Starter
Forum
Replies
Last Post
