bcty

hey guys,
im looking for a ncie turbo to use on my street car. I dont plan on useing race gas all the time. We have 94 octane here so thats what he have to work with. What are you guys running for rwhp on pump gas what turbo? what port? and hows your spool time? lets say when do you hit 10-12psi? thanks guys! I just dynoed my ported engine with a 60trim and layed down 350rwhp and 270Tq. I want more

Tyler

nyt

iTrader: (1)

at 17 psi on a stock port motor i made 427rwhp.

i should be around 475 with my t61 and 20 psi now

Wargasm

what's your dyno look like? got any more detailed specs on your turbo?

bcty

yeah hey i shouldve posted more specs. Its a T4 that has been rebuilt so i am not sure all teh internals now. It has a .96 a/r with a 60mm front wheel. 350rwhp was @ 13psi. My tuner didnt want to go higher. He felt that the octane wasnt there. My other friend has bought a Super T70 off ssautochrome on ebay and @ 11psi on a slightly smaller port made 380rwhp and 320Tq hes getting full boost @ 3800. I am getting full boost at about 3300. Im running 4 x 720cc injectors

NYT you running 20psi on pump gas?

nyt

iTrader: (1)

93 octane

bcty

intense
when do u guys figure you are running out of octane? do u tune till it gives a little then back off a bit? what size injectors are your running? I am guess bigger injectors and mroe fuel would do nothing if the octane is not there?

bcty

p.s what are the specs on your turbo nyt ?

Directfreak

iTrader: (2)

<--- Pump Gas / Blow Through Holley.

nyt

iTrader: (1)

generall 93 octane is on the limit around 22 psi in a rotary (from my experience).

i just tune to 11:1 and use safe timing (13advance/10split @ 20psi).

nyt

iTrader: (1)

i had a gt40 50 trim that was too small and couldnt provide the boost i needed up top, now i use a pt61 with to4s cover and .96 a/r p trim turbine.

eugenchoo

I hit 413rwhp at 1.1bar with my RX6 turbo. Running 100 octane pump gas.

eViLRotor

iTrader: (2)

NYT is certainly breaking the conventions of how much boost on pump gas. Steve Kan told me 17 psi on 93, when he tuned my car. Most Forum experts say 17-18psi (maybe they mean 91 Octane, but I doubt it).

Maybe I will follow my Wolf3D brother into 20 psi land, we got Sunoco 94 up here in Canada

Rx-7Addict

iTrader: (2)

I dont know many people running over 18psi on pump gas, 94 is not a huge difference from 93.. seems like you are really pushing your motor and what the gas can withstand for a few ponies...

nyt

iTrader: (1)

bastard =] the sunoco near me only has 93 =[ and only single handle per pump. i hate that ****. i fill up on 93 from the exxon near work most of the time.. havent had a problem with their gas..

nyt

iTrader: (1)

ive done it for years? i had a street ported fd with a to4s, ran 20 psi all the time. fun fun fun.

and i beat the **** out of my car also. did a few 3-4 gear pulls today on the way to work.. boostn7 runs same thing. read hos post "10.8? on pump gas blah blah" hes running stupid fast on it.

surfpac

stock port 13BT or RE?

nyt

iTrader: (1)

stock s5 13bt

bcty

wow 427rwhp is pretty freakin good for a stock port S5 @ 17psi

nyt

iTrader: (1)

i switched to the pt61 though and am running 20 psi throughout the entire rev range now. i will dyno again soon. expect some serious numbers =]

pianoprodigy

As my daily setting, I run 1 bar which made 380 whp on the dyno (while running 110) so it is probably actually a bit more than that.

bcty

some of you guys are lucky to have 100 octane at the pumps

nyt

iTrader: (1)

if i had 100 octane at the pumps.. it'd be 30psi all day =[

eViLRotor

iTrader: (2)

^ Let's say you have a safe tune to 17 psi on pump 94.

Are there any guidlines as to how many more psi of boost you can run and degrees of timing you can add with 100 Octane.

I can get it at the pump here

nyt

iTrader: (1)

its all in the tuning... 25 would be safe on a full tank of 100 provided the tuning was good and nothing else in the motor lets go =] you gotta realize thats a lot of power =]

Turblown

iTrader: (12)

Water injection.