siguy2k

iTrader: (3)

So looking at wastegates. Im debating between a tial MVR 44mm, precision 46mm or synapse 50mm. There all within a few bucks of each other. Just looking for some opinions of guys that have ran them. And this will be with a larger BW turbo. I wont be running less than 15-18psi at any givin point so im thinking the 44mm would probly do it but just looking for opinions. Thanks

catch-22

iTrader: (2)

I just finished up my S475 build and went with dual MVS 38mm and I love them. To me TiAL's craftsmanship is unbeatable and there a proven setup time and time again. Not to mention the 38s are extremely compact which is nice when you dont have a lot of room to work with like when doing dual gates. The now standard water cooling on these is really cool also. TiAL FTW!

killahrx7

i have a synapse 50mm for over two years, never had boost creep, works flawless.

vosko

iTrader: (4)

out of those 3 i've only run Tial. No problems always worked great

Rx7aholic

iTrader: (22)

What about HKS?

siguy2k

iTrader: (3)

Rich man jk. Kinda forgot about HKS but there always more money

vosko

iTrader: (4)

i'd get one of the ones you have listed simply because of the vband hookup. the 4 bolt hks,greddy etc are kind of a pain

siguy2k

iTrader: (3)

Yea I guess I didnt think of that. Its definitely going to be vband. The new exhaust will be all vbands also.

Syritis

iTrader: (2)

nearly everyone i race with uses tial and have never heard a word of bad quality or any faults. they are the best. recently i've been hearing of precision WG's being as good as tial. but haven't seen any use of them on the track to say if they work or not.
if space is limited then tial is for you, they have the most compact WG's by a long shot.
the 60mm is a beast, i had to try a couple different set ups to make it fit. 50mm is a good size but dual 38 will out flow a 60mm but they take some creativity to plumb them back to the downpipe. screamer pipes are easy.

splitfire98

Tial FTW

Jason

iTrader: (5)

All of them will work fine. The synapse is a little more confusing to route boost control because it has a few extra ports on it but it works well.

SmogSUX

iTrader: (12)

My Synapse has held my HX40's boost down to 9 psi without any creep at all. Now I just need to get my pos ebc to work so I can crank it up.

Banzai-Racing

iTrader: (11)

I am a big fan of TiAL, we run the 44mm on our 13b-re with a GT35R and the 60mm on our 20B with the GT4202R, both have performed flawlessly since day one. Also run their BOVs on both cars.

13btnos

iTrader: (1)

I have a Tial 46mm but I really like the Precision 46mm http://www.aptuning.net/Precision_46...0wastegate.htm $300 and it comes with all the springs you would really ever need. Not a bad deal. Would love to hear some feed back from someone that has had experience with the Precision wastegate.

Jeff20B

iTrader: (13)

I have a Precision 46mm. Not installed yet. Looks very well made.

siguy2k

iTrader: (3)

Ok guys precision or synapse??? Make up my mind for me! I ruled out tial because I dont want to buy any springs! I cant make up my mind!!!! AHHH!

Jason

iTrader: (5)

The Tial 44mm I carry comes with every spring. No need to buy other springs.
I don't think you can wrong with any of those waste gates

silverfdturbo6port

iTrader: (26)

same with the precision i am running, its a 46mm v band wastegate that came with every spring to make it any boost level you wanted

siguy2k

iTrader: (3)

Is your motor balanced or clearanced? Specs of it?How do you like the precision?

Thanks jason I think I'm going with the precision though.

enzo250

Tial would be my only choice....

mefarri

iTrader: (2)

Has anyone noticed that the precision stuff looks very similiar to the tial stuff?

enzo250

except it's made in china...

mefarri

iTrader: (2)

I find it hard to believe that the company who makes the best turbos on the market has knock off wastegates without some form of proof.

siguy2k

iTrader: (3)

Went with a Tial 44mm MVR.

h2ojoshua

I only use Tial