T04E rwhp 278 @13psi
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2001
Location: Boston, MA 02130
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
T04E rwhp 278 @13psi
Hp seems low, stock motor, M2 medium IC, T04E 57 trim 84 a/r p wheel. High flow Cat, Greddy exhaust, PFC, a/f 12-1 (water injection) 14 degrees advance at peak torque. Feed back is much welcome....
#2
Full Member
Join Date: Oct 2003
Location: fremont, ca
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I just had Chuck from Rotary Extreme tune my T04e, stock ports, 1300's & 650's, on a super-low-number-reading 4WD mustang dyno and it did 290HP at 11lbs. Its in an FD.
Neil
Neil
#3
Freedoms worth a buck o'5
Join Date: May 2001
Location: Calgary Alberta Canada
Posts: 2,544
Likes: 0
Received 1 Like
on
1 Post
Somethings wrong.... I made 365 on a mustang dyno with pretty much the same turbo at about that boost level on a stock port motor with low compression and so much blow by it rustproofed my car for life..Max
#4
Senior Member
Thread Starter
iTrader: (2)
Join Date: Mar 2001
Location: Boston, MA 02130
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
I had one pass at 341hp 310 tq. I am running Torque Master spark plugs which are non/resister spark plugs. He claimed some kind of problem getting readings from his computer, cancelled the session. I think EMI was screwing with his computer. Going back with stock NGK9's with stock wires to see if the problem persists.
Last edited by Jack; 10-10-05 at 08:12 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Snook
Single Turbo RX-7's
18
10-08-15 10:09 PM