Hp seems low, stock motor, M2 medium IC, T04E 57 trim 84 a/r p wheel. High flow Cat, Greddy exhaust, PFC, a/f 12-1 (water injection) 14 degrees advance at peak torque. Feed back is much welcome....

 

I just had Chuck from Rotary Extreme tune my T04e, stock ports, 1300's & 650's, on a super-low-number-reading 4WD mustang dyno and it did 290HP at 11lbs. Its in an FD.

Neil

 

Somethings wrong.... I made 365 on a mustang dyno with pretty much the same turbo at about that boost level on a stock port motor with low compression and so much blow by it rustproofed my car for life..Max

 

I had one pass at 341hp 310 tq. I am running Torque Master spark plugs which are non/resister spark plugs. He claimed some kind of problem getting readings from his computer, cancelled the session. I think EMI was screwing with his computer. Going back with stock NGK9's with stock wires to see if the problem persists.

 

Yea somethings definately wrong. I made 378whp on my FC at 1 bar with a 57 trim T04E.

 

yes i made 292whp at 14psi with my BNR stock hybrid turbo...

 

?You sure someone didn't trick you and swap your t4e57 for a gt35r???

 

get rid of that metal substrate cat.

 

Just did, welded in a ceramic cat...going back to the dyno for another pass...

 

yea right.. I made 375 at 13psi with a gt35r.