NEW DYNO NUMBERS ***603 whp @27psi Uncorrected***
NEW DYNO NUMBERS ***603 whp @27psi Uncorrected***
Steve Kan tuned my car this morning. We tried to turn the boost up to 30+ psi but my Hallman boost controller wouldn't go any higher 
This was done on a Dyna Pac dyno.
603 whp @ 27.5 psi. 500 rwtq.
I also weight the car on the scales today and it weighed in at 2,296 lbs.

This was done on a Dyna Pac dyno.
603 whp @ 27.5 psi. 500 rwtq.
I also weight the car on the scales today and it weighed in at 2,296 lbs.
Originally Posted by ErnieT
Congrats, ya got a dyno sheet? 
And at only 2300lbs, your *** should run a 9.60 easy.

And at only 2300lbs, your *** should run a 9.60 easy.
I might be able to click off a 12.90 on race gas.
Trending Topics
Originally Posted by BNA_ELLIS
Nice one. Is that 603 at the hubs or is that calculated rwhp from the hub readings ?
Originally Posted by AZ'sFastFD3S
IS your motor dowell pinned? What is done to your motor to support those #'s.
Congrats Eric.
I like your glowing red neon turbo lite!
I've hold it for a couple of minutes at full power and seen the mid pipe glowing red also
Damm that **** is light. Should do some good #'s at the track.
I like your glowing red neon turbo lite!

I've hold it for a couple of minutes at full power and seen the mid pipe glowing red also

Damm that **** is light. Should do some good #'s at the track.
Congrats Eric!!! Nice #'s! I really really really like the look of your car....i mean really really like
Now you just need to put a good auto behind that biotch and go beat the hell outta some Supra's. With as light as you are it shouldn't be a problem with the auto. I'm hoping to be somewhere in the ballpark of your power
and weight.
Now you just need to put a good auto behind that biotch and go beat the hell outta some Supra's. With as light as you are it shouldn't be a problem with the auto. I'm hoping to be somewhere in the ballpark of your power
and weight.
Originally Posted by AZ'sFastFD3S
IS your motor dowell pinned? What is done to your motor to support those #'s.






