RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Single Turbo RX-7's (https://www.rx7club.com/single-turbo-rx-7s-23/)
-   -   NEW DYNO NUMBERS ***603 whp @27psi Uncorrected*** (https://www.rx7club.com/single-turbo-rx-7s-23/new-dyno-numbers-%2A%2A%2A603-whp-%4027psi-uncorrected%2A%2A%2A-506468/)

LUPE 02-04-06 09:16 PM

NEW DYNO NUMBERS ***603 whp @27psi Uncorrected***
 
Steve Kan tuned my car this morning. We tried to turn the boost up to 30+ psi but my Hallman boost controller wouldn't go any higher :(

This was done on a Dyna Pac dyno.

603 whp @ 27.5 psi. 500 rwtq.

I also weight the car on the scales today and it weighed in at 2,296 lbs.

PDViper77 02-04-06 09:17 PM

Nice, #s Eric

red fd3g 02-04-06 09:22 PM

wow sounds good now upgrade your boost controller and make some big power do you have any pic's of you setup

ErnieT 02-04-06 09:24 PM

Congrats, ya got a dyno sheet? :)
And at only 2300lbs, your ass should run a 9.60 easy.

BNA_ELLIS 02-04-06 09:39 PM

Nice one. Is that 603 at the hubs or is that calculated rwhp from the hub readings ?

cripsR6 02-04-06 10:03 PM

Unreal! I'm glad nothing blew up or broke.

LUPE 02-04-06 10:23 PM


Originally Posted by ErnieT
Congrats, ya got a dyno sheet? :)
And at only 2300lbs, your ass should run a 9.60 easy.

Yes, I have a dyno sheet. I'll have to scan it tommorow.

I might be able to click off a 12.90 on race gas. :redface: :molepoke:

LUPE 02-04-06 10:24 PM


Originally Posted by BNA_ELLIS
Nice one. Is that 603 at the hubs or is that calculated rwhp from the hub readings ?

Calculated whp, the dynapac dynos are known to read between 5-10% lower so take that how you want :)

iceman4357 02-04-06 10:26 PM

awesome numbers, cant wait to see it run

Turbo II FC 02-04-06 10:37 PM

Im assuming this is with a T51 Kai correct?

AZ'sFastFD3S 02-04-06 10:38 PM

IS your motor dowell pinned? What is done to your motor to support those #'s.

RX794 02-04-06 11:01 PM


Originally Posted by AZ'sFastFD3S
IS your motor dowell pinned? What is done to your motor to support those #'s.

You don't need dowel pinning to support those #'s, just proper clearancing and tuning.

LUPE 02-04-06 11:04 PM

I run a HKS T51R KAI.

My motor is stock except some intake porting.

patriick 02-04-06 11:38 PM

Congrats, those HP/TQ numbers are very impressive. Even more impressive to me is the weight. I'd really like to hear about what it took to hit 2296lbs.

BNA_ELLIS 02-04-06 11:52 PM

Nevermind the dyno sheet I wanna see the video and hear that thing spool.
How was the drive home afterwards? have you managed to stop grinning yet

PDViper77 02-05-06 12:00 AM

Eric, Post those videos!!!

87GTR 02-05-06 12:04 AM

wow sweet nice numbers

Naegleria_Fowleri 02-05-06 12:29 AM

I also want to know what it took to make your car that light. That's insane. How often do you drive this thing on the street?

LUPE 02-05-06 01:41 AM

http://www.srgarage.com/picsnick/Eri...urbo%20int.jpg
http://www.srgarage.com/picsnick/Eri...dyno%20int.jpg
http://www.srgarage.com/picsnick/hot%20turbo%20int.jpg

crispeed 02-05-06 01:53 AM

Congrats Eric.
I like your glowing red neon turbo lite!:)
I've hold it for a couple of minutes at full power and seen the mid pipe glowing red also:)
Damm that shit is light. Should do some good #'s at the track.

jacobcartmill 02-05-06 02:04 AM

awesome pictures

crispeed 02-05-06 02:18 AM


Originally Posted by jacobcartmill
awesome pictures

YEP!
He's pretty brave.
Might have lost the cam due to being sucked into the turbo!:)

silvr94r2 02-05-06 05:51 AM

Congrats Eric!!! Nice #'s! I really really really like the look of your car....i mean really really like :) Now you just need to put a good auto behind that biotch and go beat the hell outta some Supra's. With as light as you are it shouldn't be a problem with the auto. I'm hoping to be somewhere in the ballpark of your power ;) and weight.

BNA_ELLIS 02-05-06 05:59 AM


Originally Posted by LUPE
I run a HKS T51R KAI.

My motor is stock except some intake porting.


????? stock exhaust ports too ?

PhatManBUD 02-05-06 06:04 AM


Originally Posted by AZ'sFastFD3S
IS your motor dowell pinned? What is done to your motor to support those #'s.

u heard him, stock with some intake porting!..., maybe u should urs up to 27.5 psi, u dont think u cud breach the 600 barrier with 5 more psi?


All times are GMT -5. The time now is 06:33 PM.


© 2024 MH Sub I, LLC dba Internet Brands