bobybeach

Hi guys your've all heard about the infamous Masterpower t70 and t61 turbos that perform very well here on the forum as a quality substitute for other big brand name turbos,

well im pleased to say that masterpower have finished there development of there new GT37 compressor, this is similer spec to the garrett and turbonetics t04b 60-1.
the gt37 will be availble in november, the trim spec measures 59.5mm inducer and 76.2 major,

As with the other T4 and T series Masterpower range... the GT37 will be available with o trim, p trim and q trim turbine wheels, and a range of T3 and T4 flanged housing is also availble with .68, .7, .84 and 1.00ar devided or open for you to choice from.

EFINI_RX-7_RZ

Which other compressors can be coupled with a q trim turbine? Do the q trims come with big shafts and 360° thrust bearings?

sleeperfc

im rocking out on a mp t70... i have about 250 miles on the new setup...

im in the 270whp range at 8psi. 8psi WG spring.

i need a boost controller bad... im ready to make some real power!

i have a ptrim 1.00 a/r divided on a divided manifold and make the full 8psi by 4k in 1st gear. this is on a stock port 8.5:1 s4 motor.

im happy with it so far and i think it should make all the power i could want for the street and track.

GUITARJUNKIE28

gt37 available in november? or just the master power brand name? i bought a gt37 last month.

MARTIN

just for masterpower.

GUITARJUNKIE28

okie

ernestgj

what kind of prices are you talking?

Greg

angelck022

yeah, im with erne how much?

FD Rey

yeah, I guess the turbo Mustang guys are getting pretty good results with these turbos.

BoostedRex

I've heard quite a few good things about the MP series turbines. And I have dealt with bobbybeach before. His customer service ROCKS from my experiences. I would suggest him to anyone looking. Great guy with great prices!!

Zach

MARTIN

I currently run the t70, and about the only thing I would trade it for, is for a BB turbo of the same if not, bigger size.

bobybeach

yes big shaft and 360deg, available with t61 and t70 compressers in big shaft form,

bobybeach

haha! thanks Zach!

guys pm me for prices

cheers!

Slammedblk7

iTrader: (7)

what does the GT40 (i think) run from master power?

bobybeach

you must mean mp gt45, this is same spec as garrett gt42 but the masterpower version uses t4 flange and 4" v band so fitment is easier.
ill pm youy price details