Single Turbo RX-7's Questions about all aspects of single turbo setups.

Anyone using a GT40????? on the street

Thread Tools
 
Search this Thread
 
Old Sep 20, 2005 | 05:55 PM
  #1  
coolrotaries's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 217
Likes: 0
From: New York
Anyone using a GT40????? on the street

Was wondering if anyone is using a Garrett GT40 on the street and have any feedback on performance.

Did searches on this forum and nothing specific comes up.

Looking for 420rwhp on the street with great spooling!!
Reply
Old Sep 20, 2005 | 06:14 PM
  #2  
armanielite's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: May 2005
Posts: 256
Likes: 0
From: southern MI
I have no idea who is running at GT40 but i have heard that they are not that great (but i have no experience with them. i personaly have a t-78 and its great for me..440@16psi).....but if your looking for 420rwhp or so..a gt35 wouldnt be a bad choice....but there are a ton of turbo options available just check around
Reply
Old Sep 20, 2005 | 06:25 PM
  #3  
Broken09's Avatar
I am becoming...
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jan 2003
Posts: 1,507
Likes: 0
From: Montgomery, AL
I run the GT35R with the T4 hotside. Put down 436 at 16psi with that boost level by 3600-3700 rpms
Reply
Old Sep 21, 2005 | 10:35 AM
  #4  
Zero R's Avatar
Just in time to die
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2001
Posts: 4,143
Likes: 2
From: look behind you
If your looking at GT40 you will need to get the 88mm wheel (GT4088), the ones who have tried to run the smaller ones (4082)aren't putting out the numbers they would like. If your looking for low to mid 400's with great spool the 35RT4 is hard to beat. Brokens car is putting out those numbers and that response is with a pretty banged up turbine wheel.
Reply
Old Sep 21, 2005 | 10:51 AM
  #5  
gt40byu's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2004
Posts: 45
Likes: 0
From: cold
i like mine
Reply
Old Sep 21, 2005 | 11:21 AM
  #6  
TTBullet's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 258
Likes: 0
From: MA
i have GT40 blowzilla from cheapturbo.com, it spools up fast.
Reply
Old Sep 21, 2005 | 02:04 PM
  #7  
coolrotaries's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 217
Likes: 0
From: New York
hey Zero How much would the 35RT4 run me?
Reply
Old Sep 21, 2005 | 03:10 PM
  #8  
Zero R's Avatar
Just in time to die
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2001
Posts: 4,143
Likes: 2
From: look behind you
I will be putting pricing up later today in our vendor section.
Reply
Old Sep 21, 2005 | 03:17 PM
  #9  
coolrotaries's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 217
Likes: 0
From: New York
great thanks
Reply
Old Sep 21, 2005 | 06:58 PM
  #10  
Zero R's Avatar
Just in time to die
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2001
Posts: 4,143
Likes: 2
From: look behind you
Here you go https://www.rx7club.com/showthread.p...53#post4795653
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbodreamz22
General Rotary Tech Support
28
Nov 10, 2023 11:08 AM
ArmAnirx7
West RX-7 Forum
35
Mar 8, 2021 12:54 AM
jim_chung
1st Gen General Discussion
10
Oct 4, 2015 09:09 AM




All times are GMT -5. The time now is 03:46 PM.