Help with ecu/harness
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: Overland Park, KS
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Help with ecu/harness
I finally got around to putting my single kit in and everything was fine until I installed my ecu. I've got a microtech lt8 with the plug and play harness and hand controller. The problem I have is that when I turn the ignition to on to set the hand controller the controller doesn't come on and the ecu and the dash lights flicker and make a weird chirping/buzzing sound. I removed the ecu to check the harness and there was no weird sound/flickering of the lights. Can anyone guess what the problem is. Any help would be great. Thanks.
#3
I am becoming...
iTrader: (1)
Join Date: Jan 2003
Location: Montgomery, AL
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Make sure none of the stock ECU ground came loose in the process of doing that install. I had the same issue. One of the grounds on the inside of the car that screws to a stud on the firewall had come loose.
-Nic
-Nic
Thread
Thread Starter
Forum
Replies
Last Post
wthdidusay82
NE RX-7 Forum
22
10-02-12 08:00 PM