I have a 88 TII, upgrading to a haltech sprint re ecu/harness and a s5 Tb/tps as of now. I'm running stock s5 primarys and I pulled the secondary's and they are Delphi 1000cc low imp. I'm wanting to run high impedance on the secondary as well due to having the new ecu. Any recommendations on good high imp 1000cc injectors. Leaning towards injector dynamics because they are rlly the only 1000cc I can find high imp and not low imp. Just wanting some thoughts before I buy them

 

I've got ID1000, they work well.
Also got ID725 at primary.

I've got a stripped interior and i can hear them rattling near and at idle rpm

 

Could I just wire in resistors on just the secondary ls?

 

Yes. Identify the ECU injector wires for the secondaries and wire in the resistors at these wires. The resistors could actually be wired into either of the two wires for each injector.

 

Where can you buy resistors and how much are they

 

http://www.digikey.com/product-detail/en/825F7R5E/825F7R5E-ND/823422