Haltech sluggish tach
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: AZ
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
sluggish tach
I have an interesting problem. I just got my new setup running, and the stock tach is accurate, but slow to respond and slow moving when comparing it to the reading the haltech is putting on the laptop screen. Any ideas on what this could be? Also, i had been running this ecu/harness before on the same car with no issue.
setup consists of:
PS1k
e&j throttle body
ls2/truck coils
full function eng. trigger kit
FD chassis.
Before when it was working fine, i was running the stock intake manifolds, stock crank sensors.
My tach output settings are 50% duty cycle, and 4 pulses per cycle.
setup consists of:
PS1k
e&j throttle body
ls2/truck coils
full function eng. trigger kit
FD chassis.
Before when it was working fine, i was running the stock intake manifolds, stock crank sensors.
My tach output settings are 50% duty cycle, and 4 pulses per cycle.
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Adaptronic Engine Mgmt - AUS
3
09-22-15 09:33 AM