SOunds like a plan...

WHo else is down? I know my 240sx buddy would like to come out.

 

LOL! Congrats and yes I think we all <3 *****.. except for the ladies =P Anyways you're timing is horrible since I'll be out of town but hopefully you guys will have fun!

 

I just found out that my porting wont be done till the 7th of next month.. bastards..

 

So far so good. Think its a wiring issue not the switch. And yea that was me, I'm in the Army, I work at camp blanding so that's why I'm always over that way.

 

5lick. what company did you send your irons to?

I heard the main engine builder at driving force does a pretty good large street port.
Coulda saved you some shipping.

 

Now that part is my little secret. I am not going to say until I get them back and see how well they do. Its a company closer to town so I want to wait and see how well it turns out before telling who I got the porting done by.

Plus, I cant give out all of the good stuff yet.

 

+1, That's Norm

 

Let me know when you are going to end up doing the rebuild Kat. Maybe we'll finally get to meet up! And I wanna be there for the rebuild.. I don't see where Russ would have any issues with it either...

 

Any other Seven owners going out to beach bvld this Sat?

 

Hey yall, I know I haven't been on for a while, but is anyone thinking about a small get together maby a cook out?

 

Where at on beach? Sonic?

 

hey jeff give me a call today. i want to go look at your car.

 

whats up for tonite?

 

new wheels, shitty pic...details in sig..

 

Are there any s4 front bumpers in town for cheap? Im thinking about taking off my ShineAuto
full bumper off.

 

All 4 are that size? Looks like the front ones stick out pretty far.

 

Yea 17x9.5 +15 offset all 4...then I have a 20mm spacer in rear and 5mm in front...fender roll and tire tuck coming soon...car is still running hot though :/

 

WHat u mean its running hot?!!! dont use it if its overheating.
ANy coolant leaks?
Good working fan?
IS our rad ok? I have a peice of **** one and works great. Whats the coolant looking like?
Underbody panels help but i never use em and never had overheating issues.

 

This is the bumper CUrrently on my car. It is a shineauto full bumper for s5. (has s5 mouldings)

It is moulded to my fenders so it will have to be cut off the car.

 

No leaks that I've seen..just replaced a clogged fluidyne rad with a stock one..changed out stock clutch fan with taurus efan..coolant flushed with redline water wetter added...sometimes it gets hot (goes to 200 or a lil more then I shut it off) other times I drive around an hour or so and never goes over 185-190...no white smoke either

 

racing beat toe eliminator bushings installed now just gotta fix a few more little issues.

 

Not sure if they had them or not, but the Junk yard out on Joe Johns road had 2 fc's and I believe that they had their bumpers. At least I know that one of them did when I was out there 3 weeks ago cause I was looking for the clear lens that goes on them and the one I needed was gone, but the one I had was there. Not sure of the name of the place, but I can give directions and possibly remember the name of the tow company that worked with them if I try hard enough....

 

for the record i already went and looked at both bumpers nethir one is worth salvaging and plus that place charges out the *** for parts.

 

Figured I'd put this in here first...I'm considering very strongly selling the full S4 TII swap out of my car...motor runs and drives great, spools good and all, but it decides when it wants to run hot so I'm tired of the headache...so I'm selling it as possibly needing a rebuild/coolant seals, if not the issue, my loss your gain...
Details from the prev owner:
Around 18k on rebuild now, large streetport
Tranny rebuilt at same time with FD gearing, has issues with 3rd sometimes, like most rx7 trannys...
Stock turbo rebuilt
ACT stage 2 clutch
Kinda janky front mount setup, has mandrel bent exhaust piping and its set in front of the rad.
Coils engine harness etc
Microtech LT10s and 4x ignition system.

Things I am keeping for sure at the moment, driveshaft and lower harness for starter etc...I may possibly part the ecu setup from the motor but not right now...if any of you local guys are interested let me know

 

NOOO!!! Dont do it.. even though i want your microtech lt-10.
IF your car never needs to be filled with coolant then the coolant seals should be good.
There is a trick to see if your car is eating coolant. There is a HOW TO in this forum somewhere. YOu need a 2 litre or something similar. Cut the bottom off the 2 litre. Put the top- side down into the coolant filler. Put coolant on the 2 litr.(the coolant filler neck area must be sealed with something so the coolant will stay in the 2 litre)


ANyways afer you have that setup. ALl you have to do is let the car warm up and star at the 2 litre looking for bubbles. If no bubbles come up and out of the filler neck and out the 2 litre than your car fine. NO bubbles is good. BUbbles are bad.

PS. Do you have your inderbody plastics? For the rad? WHen was the last time you got a fresh thermostat?
LIke i said before i run a OLD OLD OLD rad. with dings all over the place. NO underbody plastics. (I do have new thermostat and fiero fan with temp controller.)
YOurs shouldnt be runing hot.