Thanks Manny, are you going to make it to the event?

I'll have my Dad and wife take some video and there are usually some other people that take vids too.

+1 on that!

 

dont think so bud Delta has me traveling out of state doing safety audits and training dumb asses all over the country so it may be a long shot , best of luck on that event

 

I smell E 85 set with 750 double pumper all motor no power adders...

best of luck to you all

 

Hey Teddy, are you going to make it out with your car?

 

Man that brings back some fun memories , it looks good , good luck with it !!!!!

 

Making a mental note to check back here on the 23rd

Tone

 

Excellent job so far jarrett,what size of rear tire are you running,and what rear gear are you running.keep up the good work.

 

Thanks

Tone, the track that I am going to race I always run a couple tenths slower than the 1/8the mile track. I think its because of the air there and slightly higher altitude. I'm going to guess low 11's but would love to see a 10.9x.

Thanks, I am running a 26x8.5" tires and sorry, I swore to secrecy to the gearing gods.

 

Low 11s 12a is still worthy of praise. As far as I know there are only two or three 13b's that have made it into the 10's here in Oz and all except one where done many years ago.

On another note, if I was looking for a list of quickest AM cars in US / PR where would I be looking? Thinking off adding a world list to my other lists --> http://www.angrybeeracing.com/am-leader-boards/ and don't look at the rest of the site, i haven't updated it in a while

Tone

 

That is the same size tire I am using.as far as rear gear I think I know what you are running.but you can keep it a secret.I am going to be using a 6.00,although not quit enough for running just on the motor,iv had planned on spraying when I bought the gears.

 

Ok guys, one week away. Hope to see some new and old faces there. Here's some info on the event.

http://www.importdrag.com/

 

hey whats up jay i have the most bad luck i went to test my car today at fontana copletly destroyed the 5 gear in the trans will not shift into gear but i am getting that e85 fuel to work 1/8 mile time was 6.53 at 105 dont think i will be able to get out and fixed in time i pick up 2 mph and one tenth in 1/8 mile and the car is still lean. i saw chris with the rx2 i think he was having problems he only made one pass i really wanted to go to this race still going to try to fixed

 

If that's the excuse you wan't to use so that you don't have to race the little 12a then so be it. Just kidding, man that sucks! I thought you just had the transmission fixed? I hope you can get it fixed in time for the event. Do you have any more vids of your passes?

 

thats what happens when you try to go cheap and just replace the springs the slider and dog ring is junk no i did not get any vids of the pass i am working on it but g-force told me they can not get the part until thur or friday have no funds for that right now i am so upset this the fastest i ever been in the 1/8 mile with car wanted to try show everyone that my car is starting to get closer to running that magic number

 

I know !! this happened to me to, you know who has g- force parts ? call flaco he was the dealer out here in the west coast... the last time we went to his shop he still had some dog gears ,sliders, and springs . I bought some from him , ask Rene to find out for you .

 

I was at Fontana yesterday!!the car ran like ****!!I need to use my freeway dyne Tomarrow night to dial it in!! I should be at Fontana this Saturday

 

you guys messing with the cars, too much told you chris you will get lost a while back......just go back to your old setups.

darby...you can run with a 4 speed lol......or put your stock tranny back in there like the old days.Or you can flip some of the sliders with the dog rings with the other gears......

 

I went back to my old combo that ran so good for so long.kinda,it's a cozmo engine,little street port stock exhaust port FD rotor housings,just need a little more tune,I saved tune up from my 9.59 pass,probably real close if I load that tune right now!!!

 

hey rene i tried to run the car with just 4 gears last sunday when i was testimg and the car runs out of rpm the limiter at 10600 came on and i still had 300 feet to go if you can show me how to fixed the trans i will be at your shop to do it. and i sold my stock trans anyway car is going 10.72 at 110 at the 1000 foot mark it would take me to go 11000 i do not think the engine will stay together

 

You can bust a cheap move ask Rene to weld the edges of the dog gears and sliders to get more meat on them and epoxy the springs back ......I know how but i don't weld... this tranny is very friendly to work on !!

http://www.gforcetransmissions.com/o...c.asp?tranid=3

 

Where there's a will, there's a way. Get er done fellers.

 

Beautiful car ultimatejay.

 

Thanks Tommy.

The car is on the trailer and I'm all packed ready to race tomorrow.
See you guys out there. Wish me luck.

 

Good luck Jay,, our season starts at the end of this month,, even though the economy is kicking my *** were gonna make it to the track ,,,,lets see some vids..

 

Ok guys here's the results...................
Track was not prepped very well and I couldn't hook but still managed my best
ever of a 11.48 at 115mph. This is with a crappy 1.6 60ft and 7.3 1/8th mile. I know the car has an 11.0 or even a 10.9x in it but I'm moving on to better things. I already have this motor sold and I am putting the 13b together. I should have the 13bpp up and running in about a month or so. I am dog tired and my dad forgot to give me the video so I will post the videos up here shortly. Thanks for the support and stay tunned because I will make a 9 second pass.