ITS oiling system
#27
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: wisconsin
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
ok, thank you everyone...much help an now I know for sure what I need, thanks. if you cant tell, this is my first whack at rebuilding a rotory. Done piston ones before and now that the current engine wont last as long as expected the budget makes me get my hands dirty on the rotary. thanks again for all the help!
#29
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: wisconsin
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
hey, for all your help i would if i could afford it, but were on a tight budget this year. I do apperciate your help and will definitly keep you in mind in the future. Thanks Ludwig!!!!
#30
Senior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: wisconsin
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
With using the Rx-8 stationary gears, is there anything else needed, or can I just order new front/rear gears and bearings for such and "bolt" them in? Seems like another great tip. To use that three window bearing there needs to be two additional oil passaged machined in..correct? Not to mention that bearing is $77! thanks!
#31
I've got this mod on my IT7 and avg 120+psi above 3K. At idle, the pressure drops to 40psi.
Also have the larger competition 6qt pan.
The remote filter would be a good mod, tho.
Also have the larger competition 6qt pan.
The remote filter would be a good mod, tho.