BigAl's FD 20B racecar project
#533
Love your Fabricator!
Thread Starter
Join Date: Sep 2004
Location: Miami, FL
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Here you can see a couple of things, first you can see where I modified the light covers, they now serve as the inlets for the cooling ducts that cool the front brakes. You can also see the lights are mounted (these things are cool) and of course you can see the grills I made, I'm very happy with the finished product, these damn grills took forever to make, tigging each wire was ridiculous. Even the rotor you see there wasn't easy.
only two grills installed in these pics
it was tough to get the radius' just right, I did my best, they fit pretty nicely.
BigAl...
only two grills installed in these pics
it was tough to get the radius' just right, I did my best, they fit pretty nicely.
BigAl...
#535
Senior Member
Very very nice.. LOT of work in that bad boy..
Its the details like the grill that suck and take such a large volume of time... Everyone thinks.. drop in an engine and you are good! Its the little stuff to prep the car, and finish thnigs that takes tons of time.
Gorgeous car.
Its the details like the grill that suck and take such a large volume of time... Everyone thinks.. drop in an engine and you are good! Its the little stuff to prep the car, and finish thnigs that takes tons of time.
Gorgeous car.
#538
Love your Fabricator!
Thread Starter
Join Date: Sep 2004
Location: Miami, FL
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
I used 3/16 stainless round stock for the frames and stainless mesh
I don't have a pic but I simply welded four tabs to the frame and then just drilled four holes in the opening of the bumper
here they are:
http://www.visionxusa.com/LED-Solsti...duct_info.html
thanks for the kind words guys!
BigAl...
http://www.visionxusa.com/LED-Solsti...duct_info.html
thanks for the kind words guys!
BigAl...
#540
Love your Fabricator!
Thread Starter
Join Date: Sep 2004
Location: Miami, FL
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
#542
Love your Fabricator!
Thread Starter
Join Date: Sep 2004
Location: Miami, FL
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
I worked on some brake cooling, I'd like to thank Damian for posting pics of his brake cooling setup https://www.rx7club.com/race-car-tech-103/brake-setup-my-race-car-723283/ I did mine a little different but basically the same.
the first step
before adding the tube
viola
here you can see the caliper bracket also
more to come...
the first step
before adding the tube
viola
here you can see the caliper bracket also
more to come...
#544
Love your Fabricator!
Thread Starter
Join Date: Sep 2004
Location: Miami, FL
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
I finished the headlight lenses, I'm very happy with the results (big thanks to my buddy Nory for his help).
I also finished the windshield braces
BigAl...
I also finished the windshield braces
BigAl...
#548
Love your Fabricator!
Thread Starter
Join Date: Sep 2004
Location: Miami, FL
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts