Power FC only seeing 5psi HELP!

Reply Subscribe

Thread Tools

Search this Thread

Apr 1, 2006 | 05:27 PM

Rmagic13b

Thread Starter

Full Member

Joined: Nov 2005

Posts: 115

Likes: 0

From: Portland, Oregon

only seeing 5psi HELP!

after cutting the wires that your're "supposed" to cut drove me car couldnt really tell a difference but i couldnt boost past 5psi. Can anyone help me?? Please!

Apr 2, 2006 | 03:30 PM

cewrx7r1

Eye In The Sky

iTrader: (2)

Joined: Feb 2001

Posts: 7,941

Likes: 133

From: In A Disfunctional World

If you are using the PFC to control boost, adjust the boost control setting!

Apr 2, 2006 | 09:06 PM

Rmagic13b

Thread Starter

Full Member

Joined: Nov 2005

Posts: 115

Likes: 0

From: Portland, Oregon

im not using the pfc to controll boost i dont have a bc on there i was trying to see wut my boost was at but it wont boost past 5psi

Apr 2, 2006 | 09:22 PM

rynberg

Lives on the Forum

Joined: Dec 2001

Posts: 14,716

Likes: 10

From: San Lorenzo, California

First of all, if you do not have an aftermarket boost controller installed, the PFC does control your boost and you have to adjust the boost control settings using the Commander. RTFM.
Secondly, even with boost control, you cannot boost less than 7 psi due to the wastegate actuator. You have a boost leak that has nothing to do with the PFC, so get troubleshooting.

Last edited by rynberg; Apr 2, 2006 at 09:24 PM.