sunroof fc3s
sunroof fc3s
01-29-09, 09:28 PM
#4
Junior Member
Join Date: Jan 2009
Location: Gresham
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Gut it and rivet a piece of carbon fiber over it?
Make sure to use window weld all around the edges and in the rivet holes or you'll have a leaky sunroof delete.
The bare materials for doin this is about $75-$115 depending on where you get the cf.
Make sure to use window weld all around the edges and in the rivet holes or you'll have a leaky sunroof delete.
The bare materials for doin this is about $75-$115 depending on where you get the cf.
Trending Topics
02-09-09, 11:18 AM
#8
Junior Member
iTrader: (2)
Join Date: Jan 2009
Location: Chattanooga, TN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Sunroof fix
Its likely in the slide mechanism, or the cable, if you clean and lube, but it still sticks, it could be the motor or the dive slipping. Mazda still has the motor, but its like $500 bucks for a replacement. Before you do that, check the voltage going to the motor, if its to low, that may give the same symptoms. If thats good, then you may end up needing a motor after all.
--If you do, I have one FROM MY '91, just let me know.
--If you do, I have one FROM MY '91, just let me know.
Thread
Thread Starter
Forum
Replies
Last Post
