New Member RX-7 Technical Post your first technical questions here, in an easy flame free environment, before jumping into the main technical sections.

1986 Charcoal canister lines relocation.

Thread Tools
 
Search this Thread
 
Old 11-24-20, 07:06 PM
  #1  
Junior Member
Thread Starter
 
Viktor Konca's Avatar
 
Join Date: Nov 2018
Location: Spain
Posts: 20
Received 0 Likes on 0 Posts
1986 Charcoal canister lines relocation.

Hi, i have a problem with pressure being made into the fuel tank i suppose because the last owner of the car removed the charcoal canister and i assume that he just put a cap on those lines.
I'm not sure where those lines should end in the engine bay because none of the diagrams that i find here or in the internet looks like the configuration of the emissions system in my car, in most of them the line appears to end in the oil filler neck but in my car there's only one line possible as far as i can see that goes from the neck to the purge control valve.

My question is: Can i use a catch can vented with an air filter instead of a charcoal canister and it will help keeping the fumes controlled? I don't want to vent the fuel line directly to the engine bay or neither near the exhaust. (If you're wondering why i dont just buy a charcoal canister is because they're expensive and difficult to find in good condition)
And: Where the charcoal canister line should ends exactly in an S4 FC?

Thanks for read!

Last edited by Viktor Konca; 11-24-20 at 07:10 PM.
Old 11-25-20, 02:12 PM
  #2  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,817
Received 306 Likes on 267 Posts
this is certainly worth a look. i know your problem is that you already don't have one, but there is some info in it that you might find relevant to your situation.

Charcoal canister removal thread

that said, the canister and associated lines end up at the passenger side strut tower (the aft side of it).

here's a photo: https://www.nopistons.com/2nd-genera.../#&gid=1&pid=2

here is another thread. it won't hurt to read it, but i'm linking it mainly because there is a schematic diagram in it (post # 10).

https://www.rx7club.com/2nd-generati...%2A%2A-975528/

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TwinCharged RX7
3rd Generation Specific (1993-2002)
14
09-08-14 03:42 PM
RXILVER7
3rd Generation Specific (1993-2002)
1
06-05-10 06:45 PM
dbragg
1st Generation Specific (1979-1985)
4
04-30-06 11:37 PM
7-sins
3rd Generation Specific (1993-2002)
14
01-16-06 12:28 AM
vanix
2nd Generation Specific (1986-1992)
12
12-26-02 02:46 PM



Quick Reply: 1986 Charcoal canister lines relocation.



All times are GMT -5. The time now is 12:56 PM.