Maryland guys!
i love AWD
Joined: Feb 2004
Posts: 1,836
Likes: 0
From: Baltimore, MD
Originally Posted by eage8
<--- car isn't running either 
and new wheels wouldn't really look good on a primer car
and new wheels wouldn't really look good on a primer car
hey, they don't look good on a car that's 7 different shades of the same red, but that never stopped me
Originally Posted by muythaibxr
according to this site:
http://www.scuderiaciriani.com/rx7/computer.html#WOL
it's about $1425.00 for the base model.... that's like 10x what a megasquirt costs if you build it yourself, and the megasquirt actually has better configurability (Wolf3d for example has 16x16 tables, but configurable only at 125 rpm increments. With the megasquirt you can actually put the rpm bins wherever you want, even though the firmware I'm running is only using 12x12 tables... with interpolation and moveable rpm bins, you have the eqivalent of a much larger table.
Oh yeah, I ran jason's car at WOT to 5k rpms last night on the megasquirt.... and the AFR on the wideband was within 5% of 13.2:1 everywhere except the exact spot where the second set of injectors kicked in (when the second set of injectors kicks in, the pulsewidth of the first set cuts in half, and I guess it takes about .2 seconds for the fuel from the secondary injectors to get to the engine, so there was a .4 second lean spike to about 14.8:1 when the secondaries kicked in, and I'm talking to the author of the code to see if I can get a configurable delay before cutting the pulse-width on the primaries).
It should be interesting to run WOT after the aux ports are working.
http://www.scuderiaciriani.com/rx7/computer.html#WOL
it's about $1425.00 for the base model.... that's like 10x what a megasquirt costs if you build it yourself, and the megasquirt actually has better configurability (Wolf3d for example has 16x16 tables, but configurable only at 125 rpm increments. With the megasquirt you can actually put the rpm bins wherever you want, even though the firmware I'm running is only using 12x12 tables... with interpolation and moveable rpm bins, you have the eqivalent of a much larger table.
Oh yeah, I ran jason's car at WOT to 5k rpms last night on the megasquirt.... and the AFR on the wideband was within 5% of 13.2:1 everywhere except the exact spot where the second set of injectors kicked in (when the second set of injectors kicks in, the pulsewidth of the first set cuts in half, and I guess it takes about .2 seconds for the fuel from the secondary injectors to get to the engine, so there was a .4 second lean spike to about 14.8:1 when the secondaries kicked in, and I'm talking to the author of the code to see if I can get a configurable delay before cutting the pulse-width on the primaries).
It should be interesting to run WOT after the aux ports are working.
Wolf 3D V4 Plus without handheld - retail $1450
Wolf 3D V4 with handheld - retail $1450
Wolf 3D v4 without handheld - retail $1250
The PnP comes with a harness that will plug right into the s5 wiring harness and use the stock sensors AND control the OMP.
http://www.wolfems.com.au/products/e...agement/wolf3d
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
Originally Posted by falnfenix
i guess i'm wierd...wheels are one of the first things i shop for once a vehicle's running the way i want. screw paint first...heh...
I moved my old Civic with it's spare, one of it's stock wheels (175-70R13), one alloy off a friend's Corolla (185-60R14), and one off a friend's Geo Metro (165-80R13)...
I tried putting all spares on it and it sat too low to get over speed bumps.
I guess someone thought it'd be nice to have some bent stock steel rims. (Funny enough, they left the only straight and true rim.) With bald, non inspection passing tires.
Wheels are no big thing, So long as they roll.
Originally Posted by AkumaKuruma
some of the back roads to get back to laytonsville from rockville. theres an even better road up by the DMV in gaithersburg that i did at about 55-60 in a NEON (durring my drivers ed class) back 7 years ago speed limit being about 20-25 cuz it twists so much and a LOT of blind curves. then if yer nuts...go up and down sugarloaf mountain....hairpin turns, steep cliffs...NO guardrails.
Attack Gas Station!!!!
Joined: May 2004
Posts: 1,081
Likes: 0
From: Catonsville, Maryland
Originally Posted by Tofuball
Hey, Doug, Indu is in one of my classess, she says Hello!
You know, Threska's room mate? :p
You know, Threska's room mate? :p
1)is she hot?
2)is she taken?
3)does she have an rx7?
Originally Posted by f1blueRx7
I like the S5 t2 16 inch stockers. They look pretty smooth with the stock lines. I think a small lip and a good paintjob will finish the setup just right.
thanks for asking suds
I was wondering
Last edited by eage8; Apr 26, 2005 at 10:32 PM.
Brakes Don't Work
Joined: Nov 2004
Posts: 142
Likes: 0
From: dc metro area
btw.. anyone has a stock air box still laying around doing nothing?
..
i need the sleeve dat goes inbetween the stock air box and the air tunnel dat goes on top of da FAn.. yap yap. willing to pay for it too. yap yap. lett meee know! yapp yapp..
thanks. =P
..
i need the sleeve dat goes inbetween the stock air box and the air tunnel dat goes on top of da FAn.. yap yap. willing to pay for it too. yap yap. lett meee know! yapp yapp..
thanks. =P
MegaSquirt Mod
Joined: Sep 2004
Posts: 4,721
Likes: 1
From: Maryland
Originally Posted by f1blueRx7
Wolf 3D V4 Plus with handheld - retail $1650
Wolf 3D V4 Plus without handheld - retail $1450
Wolf 3D V4 with handheld - retail $1450
Wolf 3D v4 without handheld - retail $1250
The PnP comes with a harness that will plug right into the s5 wiring harness and use the stock sensors AND control the OMP.
http://www.wolfems.com.au/products/e...agement/wolf3d
Wolf 3D V4 Plus without handheld - retail $1450
Wolf 3D V4 with handheld - retail $1450
Wolf 3D v4 without handheld - retail $1250
The PnP comes with a harness that will plug right into the s5 wiring harness and use the stock sensors AND control the OMP.
http://www.wolfems.com.au/products/e...agement/wolf3d
I'd rather spend a little extra time soldering stuff myself then spend that much money.
Last edited by muythaibxr; Apr 27, 2005 at 08:26 AM.
Where is my car?
Joined: Oct 2004
Posts: 229
Likes: 0
From: Maryland
Amazing Maze
It's interesting to see how 'unsteady' your hands are... Not easy...
http://i.euniverse.com/funpages/cms_...ew_cursor3.swf
http://i.euniverse.com/funpages/cms_...ew_cursor3.swf
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
Originally Posted by muythaibxr
But it's STILL almost 10x more than megasquirt for the cheapest option.
I'd rather spend a little extra time soldering stuff myself then spend that much money.
I'd rather spend a little extra time soldering stuff myself then spend that much money.
Rotary Freak
Joined: Apr 2003
Posts: 2,702
Likes: 1
From: DC Area
"i want a flat black 7 with flat black wheels, it'd be call the sRX-7"
I remember when I showed up to the garage with the flat black t2 hood and you guys were like "damn thats cool" "how much for powder coating" the look on some faces when I told them it was rattle can super flat black. Flat black rules the world when you don't give a **** about winning paint job car shows.
I remember when I showed up to the garage with the flat black t2 hood and you guys were like "damn thats cool" "how much for powder coating" the look on some faces when I told them it was rattle can super flat black. Flat black rules the world when you don't give a **** about winning paint job car shows.
Originally Posted by sgof
It's interesting to see how 'unsteady' your hands are... Not easy...
http://i.euniverse.com/funpages/cms_...ew_cursor3.swf
http://i.euniverse.com/funpages/cms_...ew_cursor3.swf
Always Coca-Cola
Joined: May 2004
Posts: 1,542
Likes: 0
From: DMV
Originally Posted by sgof
It's interesting to see how 'unsteady' your hands are... Not easy...
http://i.euniverse.com/funpages/cms_...ew_cursor3.swf
http://i.euniverse.com/funpages/cms_...ew_cursor3.swf
Man.. i was hooked on it for like 5 minutes.. i'm thinking i hit a wall.. and i didnt.. just about to get across and "WOW" a big *** ****** "_____" pops up.. man that thing suck...
Always Coca-Cola
Joined: May 2004
Posts: 1,542
Likes: 0
From: DMV
Originally Posted by monchie01
btw.. anyone has a stock air box still laying around doing nothing?
..
i need the sleeve dat goes inbetween the stock air box and the air tunnel dat goes on top of da FAn.. yap yap. willing to pay for it too. yap yap. lett meee know! yapp yapp..
thanks. =P
..
i need the sleeve dat goes inbetween the stock air box and the air tunnel dat goes on top of da FAn.. yap yap. willing to pay for it too. yap yap. lett meee know! yapp yapp..
thanks. =P
Beat Ninja
Joined: Nov 2003
Posts: 2,076
Likes: 0
From: San Clemente, CA
Originally Posted by Tofuball
Awesome. I'm totally for having a house party to celebrate moving in
Just gotta ask Ken first
Just gotta ask Ken first
Damn youngsters....
That one is also sexual
Joined: Jun 2004
Posts: 1,671
Likes: 0
From: Columbia, MD
Originally Posted by Bukwild
"i want a flat black 7 with flat black wheels, it'd be call the sRX-7"
I remember when I showed up to the garage with the flat black t2 hood and you guys were like "damn thats cool" "how much for powder coating" the look on some faces when I told them it was rattle can super flat black. Flat black rules the world when you don't give a **** about winning paint job car shows.
I remember when I showed up to the garage with the flat black t2 hood and you guys were like "damn thats cool" "how much for powder coating" the look on some faces when I told them it was rattle can super flat black. Flat black rules the world when you don't give a **** about winning paint job car shows.