Im wiring my LT-8s right now, and I cant seem to figure out which wires on the microtech harness go to what wires on the CAS. I have the schematic from the FSM here, and it doesnt show what exactly each of the wires do, it just shows them going into the ecu. Can anyone give me a list of the functions of the 4 CAS wires? By color BEFORE the connector, or by the pin locations in the connector itself would be great.

Thanks

 

This is the way I did mine.

http://img.photobucket.com/albums/v282/stacher/CAS.jpg

 

Thanks

 

Okay, another stupid question, on the Microtech schematic in the manual, it shows the other two wires(blue and yellow, I think) wired to the white and white/black, then grounded. These two wires go back to the microtech, do I have to ground each one, or just wire them to the respective W, W/B and leave them?

 

What I did was wire the 2 remainding wires with the wires comming from the MT. It works fine.

 

Nice crude, yet effective, diagram you got there. I've got to post this for future reference when one finds the manuals non-chromatic Illustration difficult to follow.

 

Heh, Im such an idiot. Upon further inspection, the wires coming from the CAS are labeled on the microtech schematic. Also, I did just wire the remaining two wires to the other two, and the car started right up for the first time on my fresh rebuild, so I guess I did something right.

 

LT-Red ------- Harness Blue
LT Green------- Harness White
LT Yellow ---- Harness Green
LT Blue-----Harness Red

http://img514.imageshack.us/img514/5679/pb2200688sq.jpg

Thanks

 

lt8s and ltx8 wiring is different right? because i have the red to the red the blue to blue, the green to green and white to yellow. and there's a yellow flashing light on my ecu.

eric.