Microtech 6 wire tps plug wiring question PICS.
#1
Junior Member
Thread Starter
Join Date: Sep 2006
Location: vancouver
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
6 wire tps plug wiring question PICS.
I`m wiring an Lt-10 to my Jspec s5 t2 motor. Here is the picture of the TPS plug.
I searched everywhere. The microtech harness has 3 wires, Signal, 5 V and Ground. Does anyone have a diagram?
The 6 wires are:
Brown/Black
Brown/Black
Brown/white
Brown/white
Black/Green
Green/Red
Thank you!!!!!!!!!!!!!
I searched everywhere. The microtech harness has 3 wires, Signal, 5 V and Ground. Does anyone have a diagram?
The 6 wires are:
Brown/Black
Brown/Black
Brown/white
Brown/white
Black/Green
Green/Red
Thank you!!!!!!!!!!!!!
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Brown/black are both gnd wires.
Brown/white are 5vdc ref voltage.
Green/red is narrow band tps output
The other wire has to be the Full range TPS output.
I'm talking the wires on the plug that attaches TO the TPS connector. NOT the TPS connector itself.
IF this is for a LT, I'd go to the LT forum for suggestions.
Brown/white are 5vdc ref voltage.
Green/red is narrow band tps output
The other wire has to be the Full range TPS output.
I'm talking the wires on the plug that attaches TO the TPS connector. NOT the TPS connector itself.
IF this is for a LT, I'd go to the LT forum for suggestions.
#3
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
All the stock wiring info you need is in the FSM wiring diagrams. You really need to be studying these to do an EMS install. If you don't have the FSM, click here and download it in PDF format for free.
#7
Junior Member
Thread Starter
Join Date: Sep 2006
Location: vancouver
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
so I take
Brown/Black
Brown/Black
and solder them together with the ground wire,
Brown/white
Brown/white solder together with 5vdc
and
Black/Green with the signal wire.
and the full-range is not in use.
Brown/Black
Brown/Black
and solder them together with the ground wire,
Brown/white
Brown/white solder together with 5vdc
and
Black/Green with the signal wire.
and the full-range is not in use.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM