6 wire tps plug wiring question PICS.
1 Attachment(s)
I`m wiring an Lt-10 to my Jspec s5 t2 motor. Here is the picture of the TPS plug.
I searched everywhere. The microtech harness has 3 wires, Signal, 5 V and Ground. Does anyone have a diagram? The 6 wires are: Brown/Black Brown/Black Brown/white Brown/white Black/Green Green/Red Thank you!!!!!!!!!!!!! |
Brown/black are both gnd wires.
Brown/white are 5vdc ref voltage. Green/red is narrow band tps output The other wire has to be the Full range TPS output. I'm talking the wires on the plug that attaches TO the TPS connector. NOT the TPS connector itself. IF this is for a LT, I'd go to the LT forum for suggestions. |
Originally Posted by maximbc
(Post 7697530)
Does anyone have a diagram?
|
thanx alot
|
I would think you don't even need the narrow range TPS for a microtech
|
No EMS I know of has an input for a narrow-range TPS. You'd only wire up the full-range one.
|
so I take
Brown/Black Brown/Black and solder them together with the ground wire, Brown/white Brown/white solder together with 5vdc and Black/Green with the signal wire. and the full-range is not in use. |
Lol.
Man Firstly work on colours straight off the TPS and then i can help you. NEXT. YOU ONLY NEED A NARRO BAND TPS for the MICROTECH. |
All times are GMT -5. The time now is 04:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands