FC street & race electric water pump kits
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
FC street & race electric water pump kits
Electric waterpump kits for the FD are well underway. Here is part of the street version. The race version includes an alternation relocation bracket, and a completely new billet waterpump housing(being reworked at the moment). A few FC guys have been asking so I am considering making this street version to test the waters before making a race version also. Who would like an FC version? The Ewp used is this model;
http://www.turbosource.com/Davies-Cr...ts-dc-8070.htm
The street kit is looking like it will be around $700 with the EWP and controller. One does not have to use a controller, but it maximizes the setup. Typical piston engine results are 8 to 13BHP. I do have a back to back dyno test lined up on a 2 rotor that makes 700rwhp.
The race version will be substantially more( 3rd photo)
http://www.turbosource.com/Davies-Cr...ts-dc-8070.htm
The street kit is looking like it will be around $700 with the EWP and controller. One does not have to use a controller, but it maximizes the setup. Typical piston engine results are 8 to 13BHP. I do have a back to back dyno test lined up on a 2 rotor that makes 700rwhp.
The race version will be substantially more( 3rd photo)
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
We just finished the FD street kits. Now moving onto production of the race kits( which also fit FC engines). After that we will start a GB for FC street kits.
http://www.turbosource.com/FD3S-Rx7-Electric-Water-Pump-Kit-p/ts-tb-ewp.htm
http://www.turbosource.com/FD3S-Rx7-Electric-Water-Pump-Kit-p/ts-tb-ewp.htm
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
I am not sure if we are going to do a group buy, the wait won't be much longer. for them to be released... A group buy is usually because of an extended wait time for a new product, no?
It has been confirmed the FD version of this kit works too...
It has been confirmed the FD version of this kit works too...
Trending Topics
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
Plates are being cut... We have also been playing around with how to fit the EWP pump on our in house FC shop car....
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
These should be out this week and we are installing one instantly on our shop FC3S. For now here is a video of 20B 3 rotor FD with one;
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
These should be out this week and we are installing one instantly on our shop FC3S. For now here is a video of 20B 3 rotor FD with one;
3 Rotor RX7 80mm - Review Turblown Ewp - YouTube
3 Rotor RX7 80mm - Review Turblown Ewp - YouTube
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
