HELP!! rewire ignition to toggles
#1
Junior Member
Thread Starter
HELP!! rewire ignition to toggles
First off I have a repair manual, but this is first rx7 plus never done toggle switch start before either, need help. What amp toggle switches do I need, how do cut in and wire up the switches? What gauge wire is required? I am all ears, any info, or advise is appreciated!
#5
Junior Member
Thread Starter
Well my key ignition is busted cause the previous owner didn't have a key. So they is used a screw driver, when that stopped working they took the switch from the back of the ignition and used that to start the car. Now I cant turn either of them to start the car. To start the car I have to pop start while going down a hill, and can't turn the car off. I've seen some toggle setups and would like to go that route, but I have no clue where to start.
#6
Out In the Barn
iTrader: (9)
This might help. Search is your friend.
https://www.rx7club.com/2nd-generati...1401-a-939884/
I'm sure there are other threads.
https://www.rx7club.com/2nd-generati...1401-a-939884/
I'm sure there are other threads.
#7
Out In the Barn
iTrader: (9)
This is on a 3rd gen but the concept is the same.
https://www.rx7club.com/interior-ext...before-933710/
https://www.rx7club.com/interior-ext...before-933710/
Trending Topics
#8
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Is the wiring to the ignition switch all hacked up?
the switch has connectors on it before it hits the switch so really all you'd have to do is just replace the ignition switch.
Get a used switch with the key and plug and play..boom...done.
the switch has connectors on it before it hits the switch so really all you'd have to do is just replace the ignition switch.
Get a used switch with the key and plug and play..boom...done.
Thread
Thread Starter
Forum
Replies
Last Post