moka-only

-My fill plug on the trans is not coing off and will not budge.
Have any of you guys come ocross this and if yes what did you guys do to get it off, thanks alot for the help
-2nd gen S5

Nick

BASTARD

iTrader: (4)

sometimes it takes a little persuation... put a little more muscle into it

kungfuroy

iTrader: (6)

one hand holds the wrench in place, the other hand swings a hammer

C. Ludwig

iTrader: (27)

+1

Tom93R1

iTrader: (2)

Can you fill a 2nd gen through the shifter? If so thats way easier than pumping into the fill plug


If not the hammer thing usually works for these situations.

FelixIsGod29X

iTrader: (50)

I heard your not suppost to fill it through the shifter hole.

kungfuroy

iTrader: (6)

not with these, the tube that the shift rod is in doesnt drain the 'turret' into the rest of the transmission, just not enough space to flow that thick of a fluid

moka-only

Hey guys
I just took off the sensor on the tranny and filled it from there, it takes around 3.2 L of trans fluid so now it has some oil in it and I will just bring by the shop and screw around with it there.

By the way, i have an 1986 S4 and I bought an 1990 S5 (body rotted), swapped everything from the motor and all the electrical over. Now I have a full S5 swap into my 86 pretty sweet. I am having a bit of problems with my hazards and turn signals not work and my blower motor not working, everything is plugged in and all fusses are good. I dont know what is wrong.