help with fill plug on trans
-My fill plug on the trans is not coing off and will not budge.
Have any of you guys come ocross this and if yes what did you guys do to get it off, thanks alot for the help -2nd gen S5 Nick |
sometimes it takes a little persuation... put a little more muscle into it
|
one hand holds the wrench in place, the other hand swings a hammer
|
Originally Posted by kungfuroy
(Post 8217669)
one hand holds the wrench in place, the other hand swings a hammer
+1 |
Can you fill a 2nd gen through the shifter? If so thats way easier than pumping into the fill plug :D
If not the hammer thing usually works for these situations. |
I heard your not suppost to fill it through the shifter hole.
|
Originally Posted by Tom93R1
(Post 8219053)
Can you fill a 2nd gen through the shifter? If so thats way easier than pumping into the fill plug :D
|
Hey guys
I just took off the sensor on the tranny and filled it from there, it takes around 3.2 L of trans fluid so now it has some oil in it and I will just bring by the shop and screw around with it there. By the way, i have an 1986 S4 and I bought an 1990 S5 (body rotted), swapped everything from the motor and all the electrical over. Now I have a full S5 swap into my 86 pretty sweet. I am having a bit of problems with my hazards and turn signals not work and my blower motor not working, everything is plugged in and all fusses are good. I dont know what is wrong. |
All times are GMT -5. The time now is 05:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands