RX7Club.com - Mazda RX7 Forum
This is the one i need,one of the tabs got broken off when I removed the intake to run my wire harness, please let me know if you have one of these
This is the one i need,one of the tabs got broken off when I removed the intake to run my wire harness, please let me know if you have one of these
0 2016/06/25 06:34:22
I had this for about 4 or 5 years and never even opened it,to my surprise, it has a blue fan,i ordered it with a black fan,luckily i had another new one the same size laying around
I had this for about 4 or 5 years and never even opened it,to my surprise, it has a blue fan,i ordered it with a black fan,luckily i had another new one the same size laying around
0 2016/06/26 15:12:25
Here it is with the black fan mounted,and all trimmed up and fitting nice
Here it is with the black fan mounted,and all trimmed up and fitting nice
0 2016/06/26 15:14:54
Here it is installed in the car,im surprised that there is actually a good amount of room between the fan and water pump pulley.the reason the pressure tester is on the radiator, when i filled it up ,i noticed a couple of small leaks,luckily it was nothing major,just 2 leaking clamps, and the piece of heater hose that goues from that pipe that runs along the frame rail to the radiator, i painted the pipe,and when i put it back in,i didn't notice that i didn't change the hose
Here it is installed in the car,im surprised that there is actually a good amount of room between the fan and water pump pulley.the reason the pressure tester is on the radiator, when i filled it up ,i noticed a couple of small leaks,luckily it was nothing major,just 2 leaking clamps, and the piece of heater hose that goues from that pipe that runs along the frame rail to the radiator, i painted the pipe,and when i put it back in,i didn't notice that i didn't change the hose
0 2016/06/26 15:17:43
Craaazzzy, these are the fans i have left, the blue one is 16 inches at the ends of the cove,and the black one ,which came with the radiator, is 13 inches at the ends,if you need one ,let me lnow
Craaazzzy, these are the fans i have left, the blue one is 16 inches at the ends of the cove,and the black one ,which came with the radiator, is 13 inches at the ends,if you need one ,let me lnow
0 2016/06/26 15:23:16
This last part of the intercooler tube was a pain in the ass,this is how it is going to look, i didn't put the clamps on it yet,just in case i have to remove it to install the spark plug wires,or anything else
This last part of the intercooler tube was a pain in the ass,this is how it is going to look, i didn't put the clamps on it yet,just in case i have to remove it to install the spark plug wires,or anything else
0 2016/06/27 18:55:22
This is the wrong fprr
This is the wrong fprr
0 2016/07/03 13:59:22
Notice the difference in the plugs, i need the round one,my fprr has a square plug. You can't stick a square plug into a round hole, believe me, i tried
Notice the difference in the plugs, i need the round one,my fprr has a square plug. You can't stick a square plug into a round hole, believe me, i tried
0 2016/07/03 14:00:07
This is how im mounting the battery, under tje driver side storage bin frame
This is how im mounting the battery, under tje driver side storage bin frame
0 2016/07/03 14:07:52
As you can see it is rusted really bad,i guess from the extra pressure, it blew out. It was so bad that when i removed the hose from it ,it broke
As you can see it is rusted really bad,i guess from the extra pressure, it blew out. It was so bad that when i removed the hose from it ,it broke
0 2016/07/04 19:01:05
Oil all over everything
Oil all over everything
0 2016/07/06 18:45:20
Coming out of the crush washers
Coming out of the crush washers
0 2016/07/06 18:46:00
The dn oil shot almost halfway across the shop,now I have to clean it up before I go home
The dn oil shot almost halfway across the shop,now I have to clean it up before I go home
0 2016/07/06 18:46:47
Here is what it looks like,i installed it in the car,it feels loke flipping a toggle switch,no play at all.he only chargede 60.00 for it,and said he has enough materials to make 4 or 5 more,and enough materials to make 8 to 10 shift knobs if any one is interested in them
Here is what it looks like,i installed it in the car,it feels loke flipping a toggle switch,no play at all.he only chargede 60.00 for it,and said he has enough materials to make 4 or 5 more,and enough materials to make 8 to 10 shift knobs if any one is interested in them
0 2016/07/17 11:52:01
Here is how it looks installed
Here is how it looks installed
0 2016/07/17 11:56:10
I cut one of the flanges off of the presilencer that i have and welded a pipe adapter to the inside of it and clamped a cheap AutoZone flex pipe to it
I cut one of the flanges off of the presilencer that i have and welded a pipe adapter to the inside of it and clamped a cheap AutoZone flex pipe to it
0 2016/07/17 12:00:04
Bolted the fron up to the down pipe and slid the back over the rear pipe and clamped it down. This will have to do until i can take it to the exhaust shop and get my 3 inch exhaust installed
Bolted the fron up to the down pipe and slid the back over the rear pipe and clamped it down. This will have to do until i can take it to the exhaust shop and get my 3 inch exhaust installed
0 2016/07/17 12:02:06
In case anyone is wondering,this is what it said to use
In case anyone is wondering,this is what it said to use
0 2016/08/17 18:14:15
Mountedy boost gauge and wideband gauge in this gauge pod that ive been saving for 3 years
Mountedy boost gauge and wideband gauge in this gauge pod that ive been saving for 3 years
0 2016/08/17 18:15:06
0 2016/08/22 12:14:36
Here is a picture of how i ran some of the wiring
Here is a picture of how i ran some of the wiring
0 2016/10/02 18:45:20