RX7Club.com - Mazda RX7 Forum
Here is a picture of how i ran some of the wiring
Here is a picture of how i ran some of the wiring
0 2016/10/02 18:45:20
0 2016/08/22 12:14:36
Mountedy boost gauge and wideband gauge in this gauge pod that ive been saving for 3 years
Mountedy boost gauge and wideband gauge in this gauge pod that ive been saving for 3 years
0 2016/08/17 18:15:06
In case anyone is wondering,this is what it said to use
In case anyone is wondering,this is what it said to use
0 2016/08/17 18:14:15
Bolted the fron up to the down pipe and slid the back over the rear pipe and clamped it down. This will have to do until i can take it to the exhaust shop and get my 3 inch exhaust installed
Bolted the fron up to the down pipe and slid the back over the rear pipe and clamped it down. This will have to do until i can take it to the exhaust shop and get my 3 inch exhaust installed
0 2016/07/17 12:02:06
I cut one of the flanges off of the presilencer that i have and welded a pipe adapter to the inside of it and clamped a cheap AutoZone flex pipe to it
I cut one of the flanges off of the presilencer that i have and welded a pipe adapter to the inside of it and clamped a cheap AutoZone flex pipe to it
0 2016/07/17 12:00:04
Here is how it looks installed
Here is how it looks installed
0 2016/07/17 11:56:10
Here is what it looks like,i installed it in the car,it feels loke flipping a toggle switch,no play at all.he only chargede 60.00 for it,and said he has enough materials to make 4 or 5 more,and enough materials to make 8 to 10 shift knobs if any one is interested in them
Here is what it looks like,i installed it in the car,it feels loke flipping a toggle switch,no play at all.he only chargede 60.00 for it,and said he has enough materials to make 4 or 5 more,and enough materials to make 8 to 10 shift knobs if any one is interested in them
0 2016/07/17 11:52:01
The dn oil shot almost halfway across the shop,now I have to clean it up before I go home
The dn oil shot almost halfway across the shop,now I have to clean it up before I go home
0 2016/07/06 18:46:47
Coming out of the crush washers
Coming out of the crush washers
0 2016/07/06 18:46:00
Oil all over everything
Oil all over everything
0 2016/07/06 18:45:20
As you can see it is rusted really bad,i guess from the extra pressure, it blew out. It was so bad that when i removed the hose from it ,it broke
As you can see it is rusted really bad,i guess from the extra pressure, it blew out. It was so bad that when i removed the hose from it ,it broke
0 2016/07/04 19:01:05
This is how im mounting the battery, under tje driver side storage bin frame
This is how im mounting the battery, under tje driver side storage bin frame
0 2016/07/03 14:07:52
Notice the difference in the plugs, i need the round one,my fprr has a square plug. You can't stick a square plug into a round hole, believe me, i tried
Notice the difference in the plugs, i need the round one,my fprr has a square plug. You can't stick a square plug into a round hole, believe me, i tried
0 2016/07/03 14:00:07
This is the wrong fprr
This is the wrong fprr
0 2016/07/03 13:59:22
This last part of the intercooler tube was a pain in the ass,this is how it is going to look, i didn't put the clamps on it yet,just in case i have to remove it to install the spark plug wires,or anything else
This last part of the intercooler tube was a pain in the ass,this is how it is going to look, i didn't put the clamps on it yet,just in case i have to remove it to install the spark plug wires,or anything else
0 2016/06/27 18:55:22
Craaazzzy, these are the fans i have left, the blue one is 16 inches at the ends of the cove,and the black one ,which came with the radiator, is 13 inches at the ends,if you need one ,let me lnow
Craaazzzy, these are the fans i have left, the blue one is 16 inches at the ends of the cove,and the black one ,which came with the radiator, is 13 inches at the ends,if you need one ,let me lnow
0 2016/06/26 15:23:16
Here it is installed in the car,im surprised that there is actually a good amount of room between the fan and water pump pulley.the reason the pressure tester is on the radiator, when i filled it up ,i noticed a couple of small leaks,luckily it was nothing major,just 2 leaking clamps, and the piece of heater hose that goues from that pipe that runs along the frame rail to the radiator, i painted the pipe,and when i put it back in,i didn't notice that i didn't change the hose
Here it is installed in the car,im surprised that there is actually a good amount of room between the fan and water pump pulley.the reason the pressure tester is on the radiator, when i filled it up ,i noticed a couple of small leaks,luckily it was nothing major,just 2 leaking clamps, and the piece of heater hose that goues from that pipe that runs along the frame rail to the radiator, i painted the pipe,and when i put it back in,i didn't notice that i didn't change the hose
0 2016/06/26 15:17:43
Here it is with the black fan mounted,and all trimmed up and fitting nice
Here it is with the black fan mounted,and all trimmed up and fitting nice
0 2016/06/26 15:14:54
I had this for about 4 or 5 years and never even opened it,to my surprise, it has a blue fan,i ordered it with a black fan,luckily i had another new one the same size laying around
I had this for about 4 or 5 years and never even opened it,to my surprise, it has a blue fan,i ordered it with a black fan,luckily i had another new one the same size laying around
0 2016/06/26 15:12:25
This is the one i need,one of the tabs got broken off when I removed the intake to run my wire harness, please let me know if you have one of these
This is the one i need,one of the tabs got broken off when I removed the intake to run my wire harness, please let me know if you have one of these
0 2016/06/25 06:34:22
This is the fan that came with it,im not sure if im going to use rhis one or the one tjat came with my other radiator, that one has an aluminum shroud on it tjat fits perfectly on the radiator
This is the fan that came with it,im not sure if im going to use rhis one or the one tjat came with my other radiator, that one has an aluminum shroud on it tjat fits perfectly on the radiator
0 2016/06/24 15:46:48
This thing is huge,i have the same one on my tan car,and the temp gauge don't go above 1/4 of the way up
This thing is huge,i have the same one on my tan car,and the temp gauge don't go above 1/4 of the way up
0 2016/06/24 15:45:27
0 2016/06/24 15:45:04
The engine re wired up again,i am not plugging the iat in until i have everything bolted to the engine, if you look close you can see that one of the tabs is missing on it. that broke off when I installed the stock harness, that little tiny sensor was like $75. I am not breaking another one
The engine re wired up again,i am not plugging the iat in until i have everything bolted to the engine, if you look close you can see that one of the tabs is missing on it. that broke off when I installed the stock harness, that little tiny sensor was like $75. I am not breaking another one
0 2016/06/21 19:14:19
Here is the stock harness removed, i should have never installed it to begin with
Here is the stock harness removed, i should have never installed it to begin with
0 2016/06/21 19:13:12
Heres how it came out ,its actually a really good fit,and the piece of hose is tje perfect size to make it to the driver storage bin
Heres how it came out ,its actually a really good fit,and the piece of hose is tje perfect size to make it to the driver storage bin
0 2016/06/20 10:26:09
I drilled a hole in the side of the transmission tunnel and put a grommet, and ran a 6 foot piece of 3/4 in. Heater hose through it ,and then ran the power wire tjeough that, dont want to take any chances of something wearing a hole in the insulation of the wire
I drilled a hole in the side of the transmission tunnel and put a grommet, and ran a 6 foot piece of 3/4 in. Heater hose through it ,and then ran the power wire tjeough that, dont want to take any chances of something wearing a hole in the insulation of the wire
0 2016/06/20 10:22:38
Here is a picture ofy alternator and coolant and oil pressure sending unit harnesses
Here is a picture ofy alternator and coolant and oil pressure sending unit harnesses
0 2016/06/19 07:05:31
Got the harness ran through the firewall. I know it dont look pretty right now, but i want to make sure i have all of the bugs worked out of it before I wrap the harness and tie it down
Got the harness ran through the firewall. I know it dont look pretty right now, but i want to make sure i have all of the bugs worked out of it before I wrap the harness and tie it down
0 2016/06/19 07:00:58
Got the ecu,knock control unit, atmosphere pressure sensor installed on the mounting bracket. Im going to use my rtek 1.8 until i get it running good and all of the bugs worked out. Then I'll switch to my rtek 2.1
Got the ecu,knock control unit, atmosphere pressure sensor installed on the mounting bracket. Im going to use my rtek 1.8 until i get it running good and all of the bugs worked out. Then I'll switch to my rtek 2.1
0 2016/06/19 06:58:00
Also ordered a big brake kit off of ebay.sellers name is hounderville. Very good quality, this is the only picture i took of it so gar,and i forgot it at home.i still have to get all of the fc brake parts to install it, but first im going to take measurements of everything in the kit .
Also ordered a big brake kit off of ebay.sellers name is hounderville. Very good quality, this is the only picture i took of it so gar,and i forgot it at home.i still have to get all of the fc brake parts to install it, but first im going to take measurements of everything in the kit .
0 2016/06/19 06:54:11
I finally figured out what battery im going to use,i got an optima 680 ,a lot of people on here have good things to say about it,this thing is tiny,i could probably mount it in the radio opening if i wanted to
I finally figured out what battery im going to use,i got an optima 680 ,a lot of people on here have good things to say about it,this thing is tiny,i could probably mount it in the radio opening if i wanted to
0 2016/06/19 06:51:10
My battery cable came today,hopefully i can finish the wiring this weekend
My battery cable came today,hopefully i can finish the wiring this weekend
0 2016/05/20 11:18:01
I also got this in the mail the other day, im not sure whether or not if im going to run the fuel lines through it, im thinking no,because i dont want the gas running through something that is hot, if anyone has experience with one of these, please let me know
I also got this in the mail the other day, im not sure whether or not if im going to run the fuel lines through it, im thinking no,because i dont want the gas running through something that is hot, if anyone has experience with one of these, please let me know
0 2016/05/15 08:38:53
I just got back from new York ,i picked this set of rims up from i guy there. Thanks roger,i think they look great on there
I just got back from new York ,i picked this set of rims up from i guy there. Thanks roger,i think they look great on there
0 2016/05/15 08:36:41
Nice and clean now,time to get it wired up
Nice and clean now,time to get it wired up
0 2016/05/15 08:35:47
0 2016/05/15 08:27:37
I also figured out a better way to mounty afm,without it being in the way of anything. It turns out that i couldn't use the stock t.i.d.,i just used a 45degree coupler coming off of the turbo inlet,and it pretty much fit right under the intercooler pipe.plus it looks a hell of a lot cleaner this way
I also figured out a better way to mounty afm,without it being in the way of anything. It turns out that i couldn't use the stock t.i.d.,i just used a 45degree coupler coming off of the turbo inlet,and it pretty much fit right under the intercooler pipe.plus it looks a hell of a lot cleaner this way
0 2016/05/08 18:53:28
0 2016/05/08 18:53:18