My Budget Peripheral Port/80mm Turbo/60mm ITB/Intake Manifold/Fuel System Build
#301
"Elusive, not deceptive!”
That butterfly throttle is an early attempt to control compressor surge by starving the inlet.
Barry
#303
F**K THE SYSTEM!!
I have seen alot of turbo setups with just a throttle on the turbo. From karts with gxr turbo engiens to the BMW F1 4 cyl. turbo engines. And it works great alone.
#305
ERTW
iTrader: (2)
Join Date: Nov 2004
Location: Waterloo, Ontario
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Unless its done properly, it will pull oil from the centre cartridge through the seals and into the compressor housing. Guys who have been on an FSAE team will know what I'm talking about.
#307
Thanks! Those couplers are pretty sweet, but I'm friggen broke at the moment so I doubt I could afford them. Are they cheaper than Wiggens? Anyone have four 1600/1680cc injectors they would be willing to sell CHEAP?
I finished up the fuel hardlines, on to the vacuum & wastegate lines...
What's this doing in here?
I finished up the fuel hardlines, on to the vacuum & wastegate lines...
What's this doing in here?
#310
Stupid transmissions
Join Date: Nov 2008
Location: Olympia WA
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
way to use your resources! that really good work. I wish i had connections to a full blown machine shop. Must save a lot of money making your own stuff. But seems very time consuming. I'd think that it must get pretty old after awhile
#314
busted in here eye
Join Date: Nov 2008
Location: lakewood,wa
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
nice build bro cant wait till its done but in all honesty doesnt matter what a person machinces buys or installs on his or her car if it dont work then all the time and money in the world is all for nothing, the induction system design seems solid but the pp alone not being right will make a nightmare if its not done correctly, best of luck to you bro and awsome machine work
#319
Rotary Enthusiast
iTrader: (3)
Join Date: Jan 2007
Location: st. louis
Posts: 1,000
Likes: 0
Received 0 Likes
on
0 Posts
#323
Upside-umop Racing
iTrader: (1)
Join Date: Nov 2006
Location: Naples, Fl
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Wow. Everything I have seen so far is absolutely beautiful. I wish I had the means to do such a spectacular build.
........In jealousy, I hope you brake your tranny on your first run.
I was wondering, how much does your intake manifold weigh over a stock 6 port?
........In jealousy, I hope you brake your tranny on your first run.
I was wondering, how much does your intake manifold weigh over a stock 6 port?