CR garage pirate fc build
#307
Full Member
iTrader: (1)
I also installed PBM solid front and rear diff mounts. Difference is my rear diff mounts were dropped in from the top instead of the bottom. Could this be why my car is having a crazy whine in the back? I'm thinking axles are under pressure between diff and wheel bearings.
#308
hasnt been alot to update recently but our tax returns should be coming in soon and we can get the ball rolling. i also decided to do a full shave on the engine bay there will be work on that soon
thanks man!
the whine is normal for solid diff mounts. the correct way to install them is with the flanged part facing the ground its not necessarily bad to run them how you have it but its straining the front diff mount and you aren't getting the geometry correction the bushings are designed to give
thanks man!
I also installed PBM solid front and rear diff mounts. Difference is my rear diff mounts were dropped in from the top instead of the bottom. Could this be why my car is having a crazy whine in the back? I'm thinking axles are under pressure between diff and wheel bearings.
#309
Got time to work on stuff so started shaving the firewall. The Larger holes will be filled with sheet metal by our friends doing the fab. The goal is to get this engine bay looking montequilla. For those of you white folk, that means buttery
Sanding sucks
Taking this opportunity to get rid of a few small rust spots before sending the car out too
Sanding sucks
Taking this opportunity to get rid of a few small rust spots before sending the car out too
#311
powered through a couple more days of filling and sanding. this bay is gonna look $$$ once its sprayed
i dont like to think about how much of my life i has been spent sanding things
houston, we almost have touchdown (pardon the shitty lighting)
wanna get some dumb camber/angle going on soon. stuff is looking somewhat clean
free peek show via the wheelwells
we still got about one more good day of sanding to go and this thing will be able to get on the ground again finally
i dont like to think about how much of my life i has been spent sanding things
houston, we almost have touchdown (pardon the shitty lighting)
wanna get some dumb camber/angle going on soon. stuff is looking somewhat clean
free peek show via the wheelwells
we still got about one more good day of sanding to go and this thing will be able to get on the ground again finally
#312
Full Member
iTrader: (1)
Join Date: Jul 2011
Location: Sydney, Australia
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure the diff mounts go in from the bottom? Super now diff mounts go in from the top and come with a bottom piece. I have MMR ones and i have put them in from the top using the standard bump stops with no issues with clearance.
Did you have to shave the inside of the diff mounting points out to get them in from the bottom?
Did you have to shave the inside of the diff mounting points out to get them in from the bottom?
#313
He is correct they go in from the bottom, they are to raise the differential. If you put them in through the top it pretty much leaves it at stock height.
No shaving is required as they fit the exact same either way.
No shaving is required as they fit the exact same either way.
#321
but good news is i do have a little update
i came home with this last night from my buddy battlecat who gave me a ridiculous deal on it
im gonna have to make sense of that bucket of spaghetti somehow which doesnt seem like a lot of fun but necessary nonetheless. i plan to clean it up a lot by replacing the worn wires and connectors using solder instead of crimps when i can and ill most likely ditch the plastic looms for mil spec ones
it also came with this state of the art supercomputer to tune it with. i hear its using a version of windows thats not even out yet. ill probably end up using it for gaming