Rx7 masters pls help
#1
broke for a cause
Thread Starter
Join Date: Mar 2011
Location: kelowna bc canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Rx7 masters pls help
One of my stock bov's (stock twin setup w/ dual brown bov/recirculation valves) is blown, sounds like a fog horn after 9psi, where can I get new ones or is it better to block off recurculators and hard pipe in a sequencial bov? I'd love some insight
#2
Eats, Sleeps, Dreams Rotary
iTrader: (14)
cf. http://www.autosportracetech.com/RX-...leshooting.htm
where can I get new ones or is it better to block off recurculators and hard pipe in a sequencial bov? I'd love some insight
Also, please use meaningful topic titles.
#4
broke for a cause
Thread Starter
Join Date: Mar 2011
Location: kelowna bc canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure it is blown? How did you check its operation?
cf. http://www.autosportracetech.com/RX-...leshooting.htm
I have no idea what this means, but if it is faulty you should replace it. You can pick up a used one in the classifieds for $10.
Also, please use meaningful topic titles.
cf. http://www.autosportracetech.com/RX-...leshooting.htm
I have no idea what this means, but if it is faulty you should replace it. You can pick up a used one in the classifieds for $10.
Also, please use meaningful topic titles.
#5
Eats, Sleeps, Dreams Rotary
iTrader: (14)
anyways i took the directional valve off and regulated 10 psi seeing as how i couldnt make more than 9 and it and 10 blew through the valve, now these valves recirculate the boost into te air filter, is it better to just use a regular bov in the intercooler piping, also are the two valves on each line the same or no, the part numbers are minorly different but its 2 different makes
#6
Lives on the Forum
iTrader: (83)
Non informative titles are rude and annoying. cf. https://www.rx7club.com/faq.php?faq=rules_faq_item, #14.
Trending Topics
#9
broke for a cause
Thread Starter
Join Date: Mar 2011
Location: kelowna bc canada
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post