3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Not boosting properly, please help!

Thread Tools
 
Search this Thread
 
Old 05-03-02, 10:38 AM
  #1  
Ding King

Thread Starter
iTrader: (4)
 
ROTARYFDTT's Avatar
 
Join Date: Jan 2002
Location: Rochester Hills, MI
Posts: 1,289
Likes: 0
Received 1 Like on 1 Post
Not boosting properly, please help!

Well I was cruising around in the FD yesterday and had a run with one of my friends. My car was pulling hard showing 12-10-12 and holding 12 all the way till about 110 when I shut it down. It was boosting fine until the end of the night. At WOT in 1st and 2nd I get 12psi but in 3rd at about 5,000 RPM the boost just drops to 6 for a second and then stays at 5psi. I did one last pull to see what would happen and cut it at 90 and I got only 3psi (WTF). I boost perfectly in 1st and 2nd but in 3rd after 5,000 RPM I get minimal boost.
The car has a DP and its connection with the main cat is loose. When the DP was originally put on they used only 1 gasket and some shitty sealant. We took the car to AIM in Indianapolis on the way home and they took the sealant off so now it only has 1 of 2 gaskets connecting it to the main cat, and there is a noticeable gap between the 2. So am I loosing back pressure which is resulting in my secondary turbo kicking in, or is it a vacuum hose or something. Your help will be much appreciated.
Old 05-03-02, 11:12 AM
  #2  
Ding King

Thread Starter
iTrader: (4)
 
ROTARYFDTT's Avatar
 
Join Date: Jan 2002
Location: Rochester Hills, MI
Posts: 1,289
Likes: 0
Received 1 Like on 1 Post
anyone?
Old 05-03-02, 11:28 AM
  #3  
Slower Traffic Keep Right

iTrader: (5)
 
poss's Avatar
 
Join Date: Apr 2002
Location: Albuquerque, NM
Posts: 2,192
Received 2 Likes on 2 Posts
personally, i would not suspect the exhaust. other than that, i have no idea.
Old 05-03-02, 11:31 AM
  #4  
Full Member

 
redrotaryrock8's Avatar
 
Join Date: Mar 2002
Location: boston
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
if its leaking, then why is it not happening in 1st and 2nd gear? i would think the cause is something else.
Old 05-03-02, 01:02 PM
  #5  
Ding King

Thread Starter
iTrader: (4)
 
ROTARYFDTT's Avatar
 
Join Date: Jan 2002
Location: Rochester Hills, MI
Posts: 1,289
Likes: 0
Received 1 Like on 1 Post
anyone else want to take a stab at this?
Old 05-03-02, 01:44 PM
  #6  
Nomad Mod

 
Toadman's Avatar
 
Join Date: Feb 2001
Location: The O.C.
Posts: 359
Received 3 Likes on 1 Post
Is your secondary turbo kicking in at all? Hard to tell in 1st and 2nd, since you "rev out" before boost transition. So under boost load in higher gears you may likely have a boost leak. Does psi ever drop to zero, or does it hover 3-5 psi at WOT?

Search "boost" and you'll see there are many threads lately. Seems like an epidemic, also. I'm a victim of 12-8-0 boost myself and waiting for parts.
Old 05-03-02, 03:34 PM
  #7  
Ding King

Thread Starter
iTrader: (4)
 
ROTARYFDTT's Avatar
 
Join Date: Jan 2002
Location: Rochester Hills, MI
Posts: 1,289
Likes: 0
Received 1 Like on 1 Post
it hovers at 3-5 psi at WOT, doesn't drop to 0.
Old 05-03-02, 04:47 PM
  #8  
Senior Member

 
Bucrx7's Avatar
 
Join Date: Mar 2001
Location: Massachusetts
Posts: 724
Likes: 0
Received 0 Likes on 0 Posts
Look under your car where the TCA arm connects to the turbo's door. The C clip might have broken off and left those 2 unattached.
Old 05-03-02, 05:07 PM
  #9  
Ev7
Junior Member

 
Join Date: Apr 2002
Location: Tampa Florida
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Hey, I doub is your exhaust, my guess is that your Turbo Control actuator is not opening all the way; the exhaust would be insufficient to fully spin the secundary turbo plus the primary would be blowing back pressure to the secondary. check the hoses going to the TCA. Vacuum an pressure both if one is missing it will only open halfway. Also check your pressure tank an the one way valve. Good look. Ev7
Old 05-05-02, 11:24 AM
  #10  
Senior Member

 
MazdaMike's Avatar
 
Join Date: Mar 2002
Location: New York
Posts: 528
Likes: 0
Received 0 Likes on 0 Posts
what does WOT mean
Old 05-05-02, 05:57 PM
  #11  
Full Member

 
rx7racer11's Avatar
 
Join Date: Jan 2002
Location: Medford Oregon
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
warm operating temp
Old 05-05-02, 06:14 PM
  #12  
Lucky

 
OneBadRx7's Avatar
 
Join Date: Mar 2001
Location: Dubuque, Iowa
Posts: 818
Likes: 0
Received 0 Likes on 0 Posts
WOT is Wide Open Throttle.
Old 12-01-02, 09:19 PM
  #13  
r71
Senior Member

iTrader: (3)
 
r71's Avatar
 
Join Date: Jun 2002
Location: Atlanta
Posts: 655
Likes: 0
Received 0 Likes on 0 Posts
Another wasted thread that no one follows through on!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
High_Carb_Diet
Power FC Forum
1
09-05-15 09:07 AM
gabescanlon
3rd Generation Specific (1993-2002)
7
09-05-15 12:09 AM



Quick Reply: Not boosting properly, please help!



All times are GMT -5. The time now is 10:56 PM.