I've searched but couldn't find it. I found the one where the FPD was removed and the primary fuel rail was threaded to accept a brass fitting, but I'm interested in the one that the FPD hard line was retained. TIA.

 

I think Banzai Racing had a write up on it on their website a while ago. Try the site and you may have some luck...

 

That is the one where the primary rail was tapped to accept a brass fitting.

 

Anyone?

 

No clue what you are referring to but can you explain it to me and I make what you want ? Call me on the phone .

 

Thanks David. I don't need anything made right now, I'm just gathering information to figure out my best options.

 

hdp, i think youre talking about removing the fpd and taking the "damper" off of it. . . right? i cant find that thread either, but it should be just shaving if off and recovering the hole with material. if you did it that way you could fill the hole with an 1/8" npt bung (or whatever it is) and put a fuel pressure sensor in it.

i actually think david has one that he made in his shop w/o a bung on it. he may be able to help you with that.

 

Yep, that's the one I'm talking about. I remember stumbling across it and thought I had bookmarked it to check out at a later date.