2furious

If anyone has ever installed keyless entry on their FD3S, please let me know how. I've gone to numerous professional installers who don't have a clue how to put it on. Also, I need to know the closest rotary service center to Evansville, IN. I think there's one in Louisville, KY but I don't know the name and phone #. Thanks

thatoneguy

http://www.scuderiaciriani.com/rx7/a...tallation.html

skunks

its possible, i have done it (although right now my controller is fried!)

xraythis

try advanced import motorsports in Indianapolis
I think the web address is www.aimtuning.com

the_glass_man

iTrader: (2)

Make sure they don't use the lock cables, cause it will snap! And cost you big money!

darkside7

iTrader: (12)

be careful when you do this. many people in the forum will tell you that you will break the lock kinkage if you do not do it correctly. i believe spyfish007 is the best one that can explain what i'm talking about. good luck

DamonB

My car has keyless entry. One of these days I will post pics of the actuator and it's hookup. Basically the actuator is just below the release mechanism. A push/pull rod in the shape of a z goes from the actuator, around the factory release cable, and connects to a hole drilled in the lock switch just behind the stock cable. The push/pull rod on the actuator is stiff; it's not a cable.

Works beautifully but the actuator BARELY fits behind the door panel. It is an Audiovox actuator and is the rack and pinion type, not a solenoid.

I know this makes no since without a pic; when my car gets back from the bodyshop I will take some pics.

the_glass_man

iTrader: (2)

It makes perfect sense to me, cause thats the way you have to do it, if you want it done right and don't wan't to buy a J-Spec passanger door handle. Yes please take pics so people can see what you are talking about. I plan on doing this soon, with an aftermarket alarm, the only thing is getting it to disarm the factory alarm when it does this.