Kaaz help
#1
Part out my Car
Thread Starter
Join Date: Feb 2002
Location: Denver, Colorado
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
Kaaz help
i am having truoble getting the thing that the alxes sit in to come off so i can put it on my new diff housing case. Look at the pic and see the things that are highlighed! Let me know if there is some trick to getting these to come off! thanks
Marc
Marc
Trending Topics
#8
All out Track Freak!
iTrader: (263)
Join Date: Jul 2001
Location: Charlottesville VA 22901
Posts: 10,672
Received 412 Likes
on
250 Posts
Marc,
I've taken off two sets of axles and each time I disconnected everything attached to the axle and pulled the axle straight toward the wheel and it popped right out.
Best of luck and let me know how the kaaz performs
Fritz
I've taken off two sets of axles and each time I disconnected everything attached to the axle and pulled the axle straight toward the wheel and it popped right out.
Best of luck and let me know how the kaaz performs
Fritz
#10
Part out my Car
Thread Starter
Join Date: Feb 2002
Location: Denver, Colorado
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
thanks yall it just took some force... Will let you know how the kaaz does, it wont be on the road for a bit still. So aslong as they dont come out by hand then the clip is still good is that tyhe rule? also if it moves the yoke? thanks
marc
marc
Thread
Thread Starter
Forum
Replies
Last Post
racer rx
3rd Generation Specific (1993-2002)
5
06-18-03 05:06 PM
Garrett
3rd Generation Specific (1993-2002)
16
05-24-03 11:27 AM