i am having truoble getting the thing that the alxes sit in to come off so i can put it on my new diff housing case. Look at the pic and see the things that are highlighed! Let me know if there is some trick to getting these to come off! thanks
Marc

 

the things that the axles sit in to the left and righ of the pic

 

Any tips still having trouble getting it off!! thanks
Marc

 

that's really strange... i took a screwdriver and pryed them off easily.

*shrug*

 

i didnt break the axles did i??

 

nah.. don't think you broke it, i've seen it like that before on other cars. The manual just says use a pry bar to pry it off.

 

guess ill have to get tuff and just go at it! thanks

 

Marc,
I've taken off two sets of axles and each time I disconnected everything attached to the axle and pulled the axle straight toward the wheel and it popped right out.

Best of luck and let me know how the kaaz performs
Fritz

 

They are held in with little clips that pull right off. Use a pry bar and pry them right out!

A little force is necessary.

Anthony

 

thanks yall it just took some force... Will let you know how the kaaz does, it wont be on the road for a bit still. So aslong as they dont come out by hand then the clip is still good is that tyhe rule? also if it moves the yoke? thanks
marc