How to support the transmission with the engine removed? (need to move car)
#1
Junior Member
Thread Starter
How to support the transmission with the engine removed? (need to move car)
Hey guys, yesterday I removed my engine so I can rebuild it, and the transmission is still supported by my jack. However, I need to roll the car a little forward to make place for another car, is there a way to support the transmission while also allowing it to move? Unfortunately I do not have the Mazda SST
The following users liked this post:
alexdimen (01-21-19)
#6
RX-7 Bad Ass
iTrader: (55)
The trans will typically rest on the back of the subframe. For the car just sitting in the drive way that's fine, but the block of wood is a good idea if you are moving the car.
May also want to use some rope or something to keep the transmission in place.
Dale
May also want to use some rope or something to keep the transmission in place.
Dale
Trending Topics
The following users liked this post:
nickl (01-19-19)
Thread
Thread Starter
Forum
Replies
Last Post
spekdah
3rd Generation Specific (1993-2002)
1
04-12-04 03:10 PM
FuLLsMoKe
1st Generation Specific (1979-1985)
8
01-22-02 10:41 PM