3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help, No boost and Ive checked everything

Thread Tools
 
Search this Thread
 
Old 04-24-02, 09:51 PM
  #1  
Senior Member

Thread Starter
iTrader: (2)
 
Badappex's Avatar
 
Join Date: Aug 2001
Location: Florida
Posts: 372
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Help, No boost and Ive checked everything

Ive unbolted my manifold for the last time. Three times in 1 day is enough. I raced and beat a Supra(yes) but I boost spiked to 17psi. Now engine damage thank god. BUt I lost my boost. Took my manifold partially off and found a hose blew off the one way valve. Put it back on, examined surrounding stuff(couplings and hoses). Drove my car, now it sounded like a bird when boost tried to build. Unbolted my manifold but left the 2 sensors on so i can swivel it around. Found the hose in the back with a one way check valve blew off. Put it back on, checked alot more out now and still havent found anything. Put it back on, started it and i got 5psi now. Have my manifold off again and wondering where else to look.
Old 04-24-02, 09:58 PM
  #2  
Hamado things my way!

 
P'cola FD's Avatar
 
Join Date: Oct 2001
Location: Pensacola, Florida
Posts: 1,245
Likes: 0
Received 0 Likes on 0 Posts
Check your intake/intercooler hoses. If you're only getting 5 lbs then it's an intake leak. Take the couplers off and stretch them around looking for splits. If you can't find it then get an air compressor with an air blower nozzle and hook it up to an intake nipple. Put some tennis ***** or something in the big turbo intake hoses and pressurize the intake. If you have a leak, that will find it.
Old 04-27-02, 07:27 PM
  #3  
Jinx

 
technonovice's Avatar
 
Join Date: Mar 2001
Location: Raleigh, NC
Posts: 1,260
Likes: 0
Received 0 Likes on 0 Posts
You need to do a 40-70 run in 3rd gear. Cruise steady at 35 mph in 3rd . Floor it and have someone watch the boost and note the boost pattern. Be as thorough as possible.

You should get:
rpm psi
3,000 10
4,500 8 (as 2d turbo comes on)
4,500+ 10 (recovers almost immediately)
6,000+ 8 (and holds to redline)

Let me know what your numbers are. Be as specific as above.
Old 04-27-02, 07:51 PM
  #4  
Will Work for Ferrari

 
mightyslash's Avatar
 
Join Date: Oct 2001
Location: West Coast
Posts: 582
Likes: 0
Received 0 Likes on 0 Posts
I have no boost in 3rd gear, anyone know whats up? There's boost in 1st and 2nd, just not 3rd, 4th and 5th. And I changed some of the bad vacuum hoses already. Anyone got any ideas? All I got is Greddy exhaust and ACT clutch, stock precat is still in there.
Old 04-27-02, 07:56 PM
  #5  
Jinx

 
technonovice's Avatar
 
Join Date: Mar 2001
Location: Raleigh, NC
Posts: 1,260
Likes: 0
Received 0 Likes on 0 Posts
None at all? What's your pattern?
Old 04-27-02, 08:04 PM
  #6  
Will Work for Ferrari

 
mightyslash's Avatar
 
Join Date: Oct 2001
Location: West Coast
Posts: 582
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by technonovice
None at all? What's your pattern?
I dont feel the push in 3rd gear that I feel in 1st. Even though I dont have a boost gauge, I'm pretty sure the primary boost in 1st is around 7 psi. 2nd gear seems to have less boost and I dont feel anything in 3rd.
Old 04-27-02, 08:10 PM
  #7  
Will Work for Ferrari

 
mightyslash's Avatar
 
Join Date: Oct 2001
Location: West Coast
Posts: 582
Likes: 0
Received 0 Likes on 0 Posts
Well, a few months ago I hooked up my friend's boost gauge and tested the boost in 2nd gear. I got 5-6 psi at that time, that's with a slipping clutch (couldnt go WOT) and broken vacuum hoses. Now the clutch is almost new and I just changed the some of the vacuum hoses so I expect more boost.
Old 04-27-02, 08:15 PM
  #8  
Senior Member

 
Talek's Avatar
 
Join Date: Apr 2002
Location: Iowa City, IA
Posts: 267
Likes: 0
Received 0 Likes on 0 Posts
Mightyslash, you need a boost gauge.. Go buy one or borrow one or something, otherwise it's all just speculation.
Old 04-27-02, 08:17 PM
  #9  
Jinx

 
technonovice's Avatar
 
Join Date: Mar 2001
Location: Raleigh, NC
Posts: 1,260
Likes: 0
Received 0 Likes on 0 Posts
You will NEED a boost gauge to troubleshoot. Even a $20 vacuum/pressure test guage will work for trouble shooting. All you need is the guage and about 6ft of vacuum/windshield washer tubing. You can run it to the cabin temporarily. Can you at least borrow one?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
dkwasherexd
Single Turbo RX-7's
21
05-27-17 04:51 AM
sen2two
AEM EMS
9
10-23-15 07:51 PM
R7rexy
3rd Generation Specific (1993-2002)
19
09-02-15 10:24 AM



Quick Reply: Help, No boost and Ive checked everything



All times are GMT -5. The time now is 01:29 AM.