3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

help burning oil

Thread Tools
 
Search this Thread
 
Old Sep 16, 2009 | 08:28 PM
  #1  
3rdgenguy's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 156
Likes: 0
From: E-Town
Exclamation help burning oil

my rx7 with gt35r and street port one day when starting up is just blowning blue smoke and will not stop i did take off the uim and put it back on and now is blowing blue smoke is there something with the oil injection that i could have fucked up???
Reply
Old Sep 16, 2009 | 09:12 PM
  #2  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,814
Likes: 655
From: FL-->NJ/NYC again!
How is your crankcase vented? (ie where do the 2 nipples on your oil filler neck go?)
Reply
Old Sep 16, 2009 | 10:10 PM
  #3  
3rdgenguy's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 156
Likes: 0
From: E-Town
Originally Posted by GoodfellaFD3S
How is your crankcase vented? (ie where do the 2 nipples on your oil filler neck go?)
one to the side is capped closed and the one down runs down some were not to sure this would be the cause you think
Reply
Old Sep 16, 2009 | 11:37 PM
  #4  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,814
Likes: 655
From: FL-->NJ/NYC again!
Check to see where that other line goes.

Also, you may need an oil restrictor pill for your turbo feed, or your turbo drain line may be kinked/clogged.
Reply
Old Sep 16, 2009 | 11:40 PM
  #5  
3rdgenguy's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 156
Likes: 0
From: E-Town
Originally Posted by GoodfellaFD3S
Check to see where that other line goes.

Also, you may need an oil restrictor pill for your turbo feed, or your turbo drain line may be kinked/clogged.
goes to a metal line ??? and yes turbo has a pill and drian line is good
Reply
Old Sep 17, 2009 | 12:25 AM
  #6  
GoodfellaFD3S's Avatar
Original Gangster/Rotary!
Veteran: Army
Tenured Member: 25 Years
Liked
Loved
iTrader: (213)
 
Joined: Mar 2001
Posts: 30,814
Likes: 655
From: FL-->NJ/NYC again!
and the metal hard line goes....... it's like pulling teeth sometimes

it most likely goes to your compressor inlet. double check though.

You probably need to uncap the 2nd nipple on your oil fill neck and run it to a catchcan to properly depressurize everything.
Reply
Old Sep 17, 2009 | 12:34 AM
  #7  
3rdgenguy's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 156
Likes: 0
From: E-Town
Originally Posted by GoodfellaFD3S
and the metal hard line goes....... it's like pulling teeth sometimes

it most likely goes to your compressor inlet. double check though.

You probably need to uncap the 2nd nipple on your oil fill neck and run it to a catchcan to properly depressurize everything.
will try bed time now thanks for the help hope it works
Reply
Old Sep 17, 2009 | 09:44 AM
  #8  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
As test, you can start the car with the oil filler cap off to see if you have the same amount of smoke. That will let you know if you have a crankcase ventilation issue or not.
Reply
Old Sep 17, 2009 | 05:49 PM
  #9  
3rdgenguy's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 156
Likes: 0
From: E-Town
took the oil cap off ran for little will with no smoke then the oil presure gauge droped to 0 and started smoking agian ?????
Reply
Old Sep 17, 2009 | 08:34 PM
  #10  
3rdgenguy's Avatar
Thread Starter
Full Member
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 156
Likes: 0
From: E-Town
????
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
13
Jan 9, 2018 11:19 AM
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 08:07 PM.