Im getting a ecu and midpipe with my engine instead of getting pulleys. What ECU do you reccomend. Yes the PMS comes with commander thing!

Mods:
Full Exaust (dp, mp, cb)
? ECU
Pettit Cold Air Intake
Race Ported Motor with 3mm seals
Silicone Hoses with Tie raps

Also what 1/4 miles should I see? Ill be running 11-9-11 on the stock twins (non-seq).

thanks

 

neoamd-

Last I knew G-Force had gone out of business. I have one of their chips in my FC and it works great. But unless you can find a used one, which I wouldn't recommend, I think you're gonna have to look for other alternatives. You may also want to consider the Power FC. Good luck.

 

If you are running non sequential why are you getting 11-9-11?
Like Rx340 said you should consider a Power FC.

 

I own a Gforce on my FD which is setup for full intake, exhaust, boost, and IC. The gforce is so sweet because it has never leaned out. I once spiked to 17 psi, and no damaged occurred to the engine. The ecu is setup for 14.7 psi. Ive heard the PFS set parameters too lean on the high mode. Ofcourse that was earlier versions. Im hoping they fixed it by now. Get a power fc.

 

I'm surprised rikki didn't catch the above haha.

Get the PFC if you have the money. But i understand where you are coming from b/c the PFS PMC and the Re-mapped ECUs can be had for less than half the price. I have the PMC and it works fine for me and my mods. Only thing I have problem with is that when it comes down to bigger injectors..i'm stumped hehe.

Between the PMC and a Re-mapped, i'd rather have a fully tuneable one anyday. I dn't think anyone can honestly say thye will "stick" with their mods for while. Thus being able to tune helps.

Danny

 

rx7elmo -
i think i forgot to reply to your PM , did i?
are u still stuck on the larger injectors?

 

haah doh! Sorry.. I just woke up when i posted that.. Ill be running 11lbs of boost on non seq.

PMC.. thats what I ment!!! The one time I dont check spelling I screw up.. o well

Im probaly going the PMC. Thanks Rikki.. Ill ask you for more help once I get it (im getting it used for 450$ w/ commander )