Anybody know where I could find sizing for all the front suspension bolts as well as the bolts for the front suffrage? Bought an FD shell and it's missing some bolts. Some help finding a direction Would Be appreciated. Thanks!

 

Dont know if this will help you, but on this site you can find all the part numbers for the suspension and subframe bolts...it might be a good place to start

jimellismazdaparts dot com

You can open up the diagrams and exactly pin point what bolt you need and find the corresponding part number...from there on you could probably find out what the size is.

 

If its like a Second gen most of the bolts will Be NLA and no sizes given. Good luck its very frustrating.

 

Thanks I might just try and order the ones I need straight off of there, just wonder if they ship to Canada. ..

 

If you want you can just measure them with a ruler and get the diameter off a gauge which they sell at hardware stores. You can buy just about any bolt from McMaster. The only ones that I can think of that will have to be OEM are the ones for the lower control arms since they articulate for the alignments.

 

That's the problem, I may have to order them all oem cause the ones that are missing are gone on both sides so there's nothing for me to measure

 

Would be way too easy if they sold an entire bolt kit... lol

 

I have the control arm bolts listed on my website J-AUTO - Bushings, Suspension, Brake Upgrades for Mazdas (click on the FD suspension button for the bolts). These are usually in stock. I can also get you the rest of the bolts you're after. Send me a PM if you still need help getting them.

 

Thanks man, PM sent