Along with the clutch below, I'm going to replace the FPD. I'm going to order up the FPD but I'd like to know if I should replace anything else while the car is apart? Thanks

 

Since you are in CA and you will have the extension manifold off, there is a filter for the ACV that you should replace. It's like a diaphram thing. Check hoses and solenoids in rats nest.

 

replace the fuel lines there....damonb mentioned it and malloy has a sale on the fuel recall kit that includes the pipe...i plan to do a write here when the fuel recall kit comes in from Malloy

https://www.rx7club.com/forum/showth...3&page=1&pp=15

 

Installing the fuel line recall kit might be a good idea.

 

Replace the coolant hose, that routes from between the fuel lines and harness to the throttle body.

 

another good read https://www.rx7club.com/3rd-generation-specific-1993-2002-16/does-anybody-have-morren-fuel-dampener-write-up-554925/

lots of FPD threads lately in response to the engine fire threads

I deleted the FPD and went with all braided lines, personally I don't think it's needed unless you have hard lines, there is enough flex in the system to prevent the "water hammer" effect

 

how about this one? http://www.matronics.com/fuelchec/dampener.html

 

another good write-up

https://www.rx7club.com/2nd-gen-archive-72/marren-fuel-injection-fpd-retrofit-writeup-356838/

 

great illustrated writeup of fuel line/FPD:

http://www.rotormafia.com/96koverhaul/