iknowmycarsucks

My dashboard backlights and control backlights will not come on, with headlights on. Any secret to this?
the sidemarker lights and glove compartment lights are on. the dashboard was taken apart for painting.

Could something just have come unplugged?
Thank you

TurboTagTeam

Check your dimmer switch. If it is not plugged in none of the dash lights will work.

scrubolio

iTrader: (8)

check your rear lights/brake fuses, i had this happen to me before, headlights would work but rears, dash, and control lights wouldn't all because of the tail light fuse

pauli311

iTrader: (2)

where does the illumination switch wire run? Or is the plug in directly at the switch itself? I'm having the same issue

CanyonVR

Same situation here....

Last night got pulled over... Cop was nice once he realized I wasn't a teenage "fast'n'furious" wannabe...

Interior lights don't go on...Officer told me brake lights came on but regular tail lights no. Headlights work fine.

the_glass_man

iTrader: (2)

I would check first to make sure it's not a grounding or fuse issue and then work you way from there. Also if the whole dash was off, they probably didn't connect everything together again or the right way, you best bet is take if off again and double check all the connections.

CanyonVR

During lunch checked the fuses and relays and all are fine. Even replaced the Taillight fuse (even though it looked fine)...

Still nothing...

May have to call my wife to pick me up from work tonight

cabaynes

iTrader: (4)

you should probably remove the guage cluster hood and make sure everything got connected. it's a pain but, but not terribly difficult. if you can't figure it out, PM me and i can write you up some directions. also, the dimmer switch needs to be hooked up like was previously mentioned. there is a plug that goes into the back of the switch i believe, and if someone forgot to hook that up when they put the dash back in, that could be your problem

linnadawg

iTrader: (14)

Im having the same problem. I have 12v at all the r/b behind the gauges. All the r/g are grounded properly but my cluster lights wont come on. I bypassed the dimmer with a jumper wire still no lights. Let you know if I ever figure it out.

moosejaw

iTrader: (6)

Check your fuses
Then check the EGI Relay

See if you can swap relays with a buddy
They are only $20 at the dealer

linnadawg

iTrader: (14)

Didnt even notice this thread was from 06. hahaha