Dashboard and control backlights not coming on, help?
Dashboard and control backlights not coming on, help?
My dashboard backlights and control backlights will not come on, with headlights on. Any secret to this?
the sidemarker lights and glove compartment lights are on. the dashboard was taken apart for painting.
Could something just have come unplugged?
Thank you
the sidemarker lights and glove compartment lights are on. the dashboard was taken apart for painting.
Could something just have come unplugged?
Thank you
check your rear lights/brake fuses, i had this happen to me before, headlights would work but rears, dash, and control lights wouldn't all because of the tail light fuse
Same situation here....
Last night got pulled over... Cop was nice once he realized I wasn't a teenage "fast'n'furious" wannabe...
Interior lights don't go on...Officer told me brake lights came on but regular tail lights no. Headlights work fine.
Last night got pulled over... Cop was nice once he realized I wasn't a teenage "fast'n'furious" wannabe...
Interior lights don't go on...Officer told me brake lights came on but regular tail lights no. Headlights work fine.
I would check first to make sure it's not a grounding or fuse issue and then work you way from there. Also if the whole dash was off, they probably didn't connect everything together again or the right way, you best bet is take if off again and double check all the connections.
Trending Topics
you should probably remove the guage cluster hood and make sure everything got connected. it's a pain but, but not terribly difficult. if you can't figure it out, PM me and i can write you up some directions. also, the dimmer switch needs to be hooked up like was previously mentioned. there is a plug that goes into the back of the switch i believe, and if someone forgot to hook that up when they put the dash back in, that could be your problem
Im having the same problem. I have 12v at all the r/b behind the gauges. All the r/g are grounded properly but my cluster lights wont come on. I bypassed the dimmer with a jumper wire still no lights. Let you know if I ever figure it out.
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
MoTeC
5
Sep 10, 2015 07:58 PM



